Overview
The Quick Cleaner will help you to reduce your waste disposal costs and lower your VOC output. Flush times are lowered, decreasing color change times and improving overall process efficiency. The unit simultaneously mixes solvent and compressed air to scrub paint lines and fluid passages quickly and thoroughly, eliminating color contamination. Easily fitted into automatic installations for immediate solvent savings. Both manual and automatic applications can benefit from quicker color change times with adjustments to the flush sequence.
FEATURES
– Simultaneously mixes solvents and compressed air to scrub paint lines and passages reducing solvent usage and cleaning time
– Eliminates potential color contamination
– Check valves on both air and fluid inlets prevent possible backflow contamination
– Easily installed with multiple mounting methods
– Connectable to either NPSM or BSP threads
– All wetted parts are stainless steel, PTFE and plated brass to work with all materials and solvents
Contact us today to find out how the Quick Cleaner can help reduce your solvent consumption.
* Savings are based on a mixture of lab and customer trials. Actual results may vary.
The color contamination seeps into cleaning solvent and is drained from fluid passage. Flow Rate of cleaning solvent at center of fluid hose is faster than the one near inside fluid passage. Then It takes color contamination a while to seep into cleaning solvent. Cleaning solvent mixed air flow rapidly through fluid passage with particle of cleaning solvent striking hard against inside fluid passage. This results in clean and dry fluid passage using less cleaning solvents and time.
The difference in the cleansing time
| Cleaning low viscosity materials: | cleansing time |
|---|---|
| * Using the Quick Cleaner | 6.6 seconds |
| * Using the thinner | 8.3 seconds |
| Cleaning high viscosity materials: | cleansing time |
| * Using the Quick Cleaner | 11.5 seconds |
| * Using the thinner | 14.7 seconds |
Test Condition :
-
- Viscosity : 12 seconds/IHS (low viscosity), 36 seconds/IHS (high viscosity)
- Hand Spray Gun Fluid Tip Size : 1.0 mm
- Fluid hose : PTFE 6×4 mm
- Fluid hose length : 2.5 m
Comparison of Cleaning Time
| ■Flush out low viscosity | Cleaning time |
|---|---|
| *Flush with Quick cleaner | 6.6 seconds |
| * Flush with thinner | 8.3 seconds |
| ■Flush out high viscosity | |
| * Flush with Quick cleaner | 11.5 seconds |
| * Flush with thinner | 14.7 seconds |
Test Condition:
- Viscosity : 12 seconds/IHS (low viscosity), 36 seconds/IHS (high viscosity)
- Hand Spray Gun Fluid Tip Size : 1.0 mm
- Fluid hose : PTFE 6×4 mm
- Fluid hose length : 2.5 m
| Cleaning Solvent Capacity | 5L |
|---|---|
| Air Inlet Size | G 1/4 |
| Cleaning Solvent Outlet Size | G 3/8 |
| Maximum Working Pressure | 0.69 MPa |
| * Regulate to 0.69MPa max * Dedicated Organic Solvent | |
The image above shows the air mixed with solvent creates a turbulence which achieves a cleaner surface in a shorter time.
The unit includes HD-QCH and Diaphragm pump* easy to refill cleaning solvent
*With DX70R3-T Diaphragm pump is standard model.
Please contact us for other combination.
| Air Inlet Size | R1/4(M) (with check valve：1/4Taper male screw) |
|---|---|
| Cleaning Solvent Inlet | G1/4(F) |
| Cleaning Solvent Outlet | R3/8(M) |
| Main Body Material | SUS |
| * Regulate to 0.69MPa max * For Water and Organic Solvent * All screw at Quick Cleaner Head are female straight threads | |
