- TurboDisk Sell Sheet 05-545-01 [ English ]
atomization due to its capacity to achieve much higher rotational
speeds and transfer efficiencies. By integrating the TurboDisk into
your production process, you can enhance transfer efficiency
while reducing VOC emissions. Proven quality improvements
have been observed across a wide range of coating materials,
including waterborne and high-solids options. This applicator is
ideal for both small and large applications, such as aluminum
extrusions, automotive underbody components, and smaller
racked products.
Best finish
quality
Consistent
application
High transfer
efficiency
TurboDiskTM
High speed applicator with superior
atomization capabilities to handle
even the most difficult coatings.
TURBODISK™
THE HIGH SPEED APPLICATOR WITH SUPERIOR
ATOMIZATION CAPABILITIES TO HANDLE EVEN
THE MOST DIFFICULT COATINGS
With the introduction of TurboDisk, Ransburg has set a new standard in
providing electrostatic applicator solutions to the coatings industry.
Integrating the TurboDisk produces sustaintially finer atomization due to its
ability to generate much higher rotational speeds and transfer efficiencies.
Proven quality improvements are realized with the widest range of coating
materials including waterbornes and high solids.
Serrated Edge Conical Disk
Dual Feed Fluid System
Bold, High Visibility Color Coding
Stainless Steel Construction
Easy Maintenance Design
TurboDisk Rotary Atomizer
A powerful solution can start with a simple conversation
We want to help build the best solution to your application challenges. Learn more about what
we can offer by reaching out to the office nearest you.
For more information,
visit binks.com. ©2025 Binks.
Models and specifications subject to
change without notice. All rights reserved.
Form No. 05-545-01
Americas 1.800.992.4657 marketing@binks.com
EMEA 44.0.120 257.1111 marketing-eu@binks.com
China 86.21.33730108 mkt_cn@binks.com
Japan Sales Office 81.45.785.6421 jp-rans-tokyosales@binks.com
Japan Binks/DeV 81.45.785.6421 jp-binks-devi@binks.com
India/SE Asia 44.0.120 257.1111 marketing-roa@binks.com
Serrated Edge Conical Disk: Turbodisk’s proprietary
edge design provides superior atomization quality
even at minimal rotational speeds
Easy Access Fairing Design: makes external surface
cleaning a labor-saving snap
Dual Feed Fluid System: allows for higher fluid delivery
rates and increased productivity
Legendary Reliability: Turbodisk incorporates proven,
long-term turbine motor reliability
High Flow Regulators/Fluid Valves: allows for
simultaneous paint push out while solvent washes the
feed tube and disk
Stainless Steel/Teflon Construction: majority of
component assemblies are virtually impervious to fluids
Enhanced Readouts: optional speed readout (control)
incorporates reliable magnetic pickup for fiber-optic
transmission of rotational speed data
Easy Maintenance Design: upper and lower
assemblies are easily fitted and latched for efficient
and economical maintenance procedures
MECHANICAL
SPECIFICATIONS
ELECTRICAL - POWER SUPPLY
Turbine Speed Variable to 40,000 rpm
max. (6 conical disk) (152 mm)
Turbine Type Ball Bearing
Weight 57 lbs. (approximately) (26 kg)
Length 36 in. (914 mm)
Diameter 13.25 in. (336 mm)
Turbine Air At max. speed (40k rpm), requires 103.1 psi
and £1.1 scfm, unloaded
Single Fluid Flow Range
Waterborne To 1200 cc/min.
Solvent Base To 1500 cc/min.
High Solids To 1100 cc/min. (80%+)
Air Inlet Trigger/Dump 70-100 psi
Type MicroPak™ Industrial or
Voltage Master™2
Charbing Method Direct
Input Voltage 0-100 kV
Turbine Speed Control PulseTrack™2
or Monitor (optional)
FEATURES
