- Century LEL Gun Literature A101-90 [ English ]
the best internal mix gun on the market today
A101-90
Spray Guns
B I N K S C E N T U R Y L E L I N T E R N A L M I X S P R A Y G U N
1 0 2 - 3 8 0 0 S E R I E S
www.binks .com
www.binks.com
Sales and Service Through A Global Network of Industrial Distributors
North American Offi ce
Industrial Finishing
195 Internationale Blvd.
Glendale Heights, IL 60139 USA
630-237-5000
Toll Free Customer Support and Technical Assistance
800-99-BINKS (800-992-4657) USA & Canada Only
Toll Free Fax
888-246-5732 USA & Canada Only
© 2009 Industrial Finishing • Printed in USA • All Rights Reserved A101-90 (09/2009)
Catalyst
Impingement
Injection
System
(CIIS)
technology
PATENT
PENDING
Impingement
Injection
technology
Part Number Description
118-8XXYY Century LEL Spray Tip
102-2478 3/8 NPS Resin Inlet Tube
207-12212 #3 JIC Catalyst Inlet
102-2441 1/4 NPS catalyst inlet
102-3840 1 Static Mix Kit
102-3841 2 Static Mix Kit
102-3842 1 Mixer Housing Assembly
102-3843 2 Mixer Housing Assembly
106-1267 Soft Seal Kit
106-1268 Flush Valve Repair Kit
106-1269 Major Rebuild Kit
106-1174 Soft Seat Kit
106-1175 Catalyst Filter Repair Kit
102-3839-K6 1 Static Mixers (6-pack)
102-3779-K6 2 Static Mixers (6-pack)
102-2510 3/8 Dowel Pin
102-2511 1/4 Dowel Pin
Most O-rings and gaskets are available in multi-
packs. See part sheet 77-2914 for repair part detail.
Gun assemblies are sold without tips.
K I T S & A C C E S S O R I E S
Model Number GP Resin Filled Resin 1 Mixer 2 Mixer Chopper
102-3800-1
102-3800-2
102-3825-1
102-3825-2
102-3835-1
102-3835-2
H O W T O O R D E R T H E C E N T U RY L E L I N T E R N A L M I X G U N
Century LEL Internal Mix Spray Gun
Introducing the 102-3800 series, these three new internal mix spray guns
are the latest addition to the popular Binks Century Series.
MODEL 102-3800 Wet Out GP Resin • MODEL 102-3825 Chopper GP Resin • MODEL 102-3835 Chopper Filled Resin
This gun works better than any other gun
I have used. It does a better job on wet out
and there is no need to back-wet the glass.
In our 8 week trial period, we did not
touch the gun for maintenance and had
no downtime. I want enough to replace our
current resin guns!
– Quote from Major Manufacturer of Boats in Central Florida
Features and Benefi ts
■ CATALYST IMPINGEMENT INJEC-
TION SYSTEM (patent pending)
More complete mix in a smaller,
lighter, balanced gun
■ DROP FORGED HIGH-STRENGTH
ALUMINUM ALLOY HEAD AND
HANDLE Longer life and higher
quality than competing guns
■ LOW-VELOCITY NON-ATOMIZING
SPRAY WITH LEL TIPS Styrene
emission and material use reduction;
MACT compliant
■ RUGGED CARBIDE RESIN NEEDLE
AND NYLON RESIN SEAT STAN-
DARD; CARBIDE RESIN SEAT AVAIL-
ABLE (STANDARD ON FILLED RESIN
GUN) Longer time between main-
tenance events; lower maintenance
and down-time cost
■ LOW VOLUME MIX CHAMBER AND
ONE-TOUCH FLUSHING Flush clean
with minimal waste and solvent use
■ MULTI-DIRECTIONAL CHOPPER
ADJUSTMENT (UP, DOWN, FORE,
AFT, LEFT, RIGHT) Fine-tune chop
placement into resin fan; better
process control and part quality
■ ERGONOMIC, SHAPED HANDLE;
LIGHTWEIGHT AND BALANCE
Reduced operator fatigue and
increased comfort
■ LARGE MATERIAL PORTS;
NO SHARP TURNS IN FLUID PATH
Lower pump pressure for less wear
and tear on pump
Specially designed for the application
of polyester or vinyl-ester resins,
mixing effi ciency is radically im-
proved with the patent-pending
Binks Catalyst Impingement Injection
System (CIIS). The result is an ex-
cellent catalyst mix in a lighter, more
balanced and comfortable gun with
simple one-touch fl ushing and tool-
free shut down at the end of the day.
First developed by Binks in the 1980’s
and still in-demand with over twenty
years of continuous improvement,
the Binks Century Series line has
resulted in the best internal mix gun
on the market today.
Specif ications:
Resin Inlet:
1/4 or 3/8 NPS (m)
Catalyst Inlet:
#4 JIC (7/16-20)
Solvent Inlet:
1/4 NPS (m)
Chopper Air Inlet:
1/4 NPS (m)
Max Fluid
Pressure:
3500 psi (241 bar)
Max Solvent
Pressure:
100 psi (7 bar)
Weight:
2.4 lbs. (1.1 kg)
Wetted Matl’s
of Construction:
Anodized Aluminum,
Stainless Steel,
UHMWPE, PTFE,
Silicone Rubber,
EPR, Nylon,
Tungsten Carbide
Part Sheet:
77-2914
