- Binks Pressure Tank Literature EN [ English ]
- Binks Pressure Tank Literature FR [ French ]
- Binks Pressure Tank Literature TU [ Turkish ]
- Binks Pressure Tank Literature IT [ Italian ]
- Binks Pressure Tank Literature PO [ Polish ]
- Binks Pressure Tank Literature RU [ Russian ]
and ASME PT Series Tanks
Binks
Pressure
Tanks
Binks Pressure Tanks
A New Generation: Make Every CFM Count Reduce
Air Consumption by up to 90%
Binks rotary piston air driven agitators are the cost-
saving alternative agitators that typically provide a
return on investment in under one year.
Typical pneumatic agitator motors blow
compressed air across vanes and allow for large
volumes of air to be exhausted without doing any
work. The Binks rotary piston motor directs air into
sealed piston chambers to make every CFM count.
This significant reduction in CFM consumption and
running costs quickly justifies the installation cost,
making it the next best choice before going fully
electric*. Ask Binks about savings applicable to
your operation.
Instantly Know Your Agitator Speed
With the press of a button, Binks rotary piston
motors instantly indicate your RPM speed –
ensuring you achieve the right balance between
paint conditioning and energy efficient operation.
A Solution for Most Applications
With options for 5 gallon pails, pressure tanks, 55
gallon drums, day tanks, and totes, you’re sure to
find the right Binks rotary piston motor solution for
your paint kitchen.
Low Maintenance and Durable
No air line lubrication is required for the piston
motor. Periodic greasing of the bearings will help
extend its service life.
Purchase a new 2 to 15 gallon
stainless steel pressure tank
complete with a 1/4 hp rotary
piston agitator. Retrofit any
existing Binks 183 Series
pressure tank that has a 15:1
geared agitator.
31-502 1/4 p Air motor assembly to replace 15:1 geared drive
Note: Suitable for viscosities up to 1000cP
Note: Suitable for viscosities up to 1000cP
Notes: Suitable for viscosities up to 1000cP Picture for reference only
183S-21431-502
DPT4c319-2T 31-524
*Actual savings dependent on many variables including environment and
product configuration. Data based on Binks 15:1 geared agitator drive run
0-100 psi max, 50-150rpm within a 1 poise fluid.
STAINLESS STEEL TANK
2
GALLON
5
GALLON
10
GALLON
15
GALLON
PAILS (5 GALLON)
PRESSURE TANKS
Single 183S-214 183S-514 183S-1014 183S-1514
(Regulated air to tank only)
Double 183S-224 183S-524 183S-1024 183S-1524
(Regulated air to tank and gun)
Extra Sensitive 183S-234 183S-534 183S-1034 183S-1534
Extra Sensitive 183S-244 183S-544 183S-1044 183S-1544
w/ gun regulation
PART NUMBER DESCRIPTION
PART NUMBER DESCRIPTION
DPT4c319-2T 1/4 hp, c/w Tachometer, 3 blade prop,
SS hinged lid assembly, siphon & return openings
QS-PS40P12R 1/4 hp, single 4.72 diameter paddle, 15.75 shaft
(cover not included)
31-604 5 Gallon Pail Mount assembly without motor
(refer to back page to pair with 1/8, 1/4, 1/2 or 1 hp motor)
LARGE TANKS (30 & 60 GALLON)
PART NUMBER DESCRIPTION
83-5808 30 Gallon galvanized ASME tank with 1hp agitator
83-5708 60 Gallon galvanized ASME tank with 1hp agitator
31-524 Air Motor assembly (1 hp) to replace 15:1 geared
drive on 30/60 gallon tanks
Binks now features an expanded line-up of
Stainless Steel & Galvanized Tanks Featuring
Rotary Piston Agitation
GALVANIZED TANK 2 GALLON 5 GALLON 10 GALLON 15 GALLON
Single 183G-214 183G-514 183G-1014 183G-1514
(Regulated air to tank only)
Double 183G-224 183G-524 183G-1024 183G-1524
(Regulated air to tank and gun)
Extra Sensitive 183G-234 183G-534 183G-1034 183G-1534
Extra Sensitive 183G-244 183G-544 183G-1044 183G-1544
w/ gun regulation
Binks Pressure Tanks
STEP 2: SELECT PRESSURE TANK FAMILY, BASED ON AVAILABLE FEATURES
STEP 1: SELECT SIZE AND SCOPE
GALLONS OF
COATING PER 8
HOUR SHIFT
STEP 3: SELECT HOW MANY REGULATORS YOU’LL NEED STEP 4: SELECT AGITATION OPTIONS
The case for ASME Code Tanks:
Numerous government and insurance bodies (e.g. OSHA, your fire marshal, your insurance underwriter, etc.)
use National Fire Protection Association (NFPA) standards. NFPA standards call for the use of ASME-code
tanks. All Binks pressure tanks are made to ASME standards.
Note: Neither Binks nor its employees are an Authority Having Jurisdiction (AHJ).
How to select a Binks Pressure Tank
It’s helpful to know the following information:
• Size/Scope of your operation in terms of gallons per
day per spray for a given spray station.
• If you’re using a plural component coating, what is
the tank life of your coating?
• Is your coating waterborne or solvent borne? What
degree of corrosion resistance do you need?
• Will you need to use a bottom outlet (may be needed
for high viscosity materials or high cost materials).
• Will you be putting either 1-gallon or 5-gallon pails in
the interior of the pressure tank
Up to 5 2 or 5 Gallon 2 Gal. 2 Gal. 2 Gal. 5 Gal.
Up to 10 10 Gallon 2 Gal. 2 Gal. 5 Gal. 10 Gal.
Up to 15 15 Gallon 2 Gal. 5 Gal. 5 Gal. 15 Gal.
Up to 30 30 Gallon 5 Gal. 5 Gal. 15 Gal. 30 Gal.
Up to 60 60 Gallon 5 Gal. 15 Gal. 30 Gal. 60 Gal.
More than 60 60 Gallon 5 Gal. 15 Gal. 60 Gal. 60 Gal.
SUGGESTED
TANK SIZE
FOR SINGLE
COMPONENT
COATING
1 HOUR
TANK LIFE
2 HOUR
TANK LIFE
3 HOUR
TANK LIFE
4 HOUR
TANK LIFE
SUGGESTED TANK SIZE
FOR PLURAL COMPONENT COATING
Examples: For a single component coating spraying of 12 gallons of coat-
ing per 8 hour shift, we suggest a 15 gallon tank. For a 4 hour tank life plural
component coating, consuming 12 gallons per 8 hour shift, we suggest a 5
gallon tank.
2 Gallon X X X X
5, 10, 15 Gallon X X
30, 60 Gallon X X
Includes Fill Port X X X X
Waterborne Compatible no yes, w/liner no yes no yes
Overall Corrosion Resistance good better better best better best
Maximum Pressure Rating 80 psi (5.5 bar) 80 psi (5.5 bar) 110 psi (7.5 bar) 110 psi (7.5 bar) 110 psi (7.5 bar) 110 psi (7.5 bar)
Available with Bottom Outlet X X X X
2 Gallon Size (Accepts 1 gal. pail) X X X
5 Gallon Size (Accepts 5 gal. pail) X X
83C w/ZN
LID
83Z w/SS
LID 183G 183S
30/60
GALLON
30/60 GALLON
w/SS LINER
Single regulated X
Double regulated X X
Single regulated w/
improved low fluid X
pressure control
Double regulated w/
improved low fluid X X
pressure control
FLUID REGULATION
0 TO 80 PSI
Choose for viscous or
long runs of material
FLUID REGULATION
0 TO 80 PSI
Choose for viscous or
long runs of material
FLUID REGULATION
0 TO 80 PSI
Choose for viscous or
long runs of material
None
Direct Drive X
15:1 Gear Reduced X X
LOW VISCOSITY/
SMALLER VOLUME
HIGHER VISCOSITY/
LARGER VOLUME
AIR ENTRAPMENT RISK
For coatings that remain well dispersed over time, you may not
need any agitation. If you have either a low viscosity material,
or a small volume of material, direct drive agitation is an option.
For higher viscosity materials or larger volumes of material, or
where there is a risk of air entrainment, we recommend a gear
reduced agitator.
Binks Pressure Tanks
BINKS ASME CODE PT TANKS
CAPACITY AND DIMENSIONS
SPECIFICATIONS
BINKS ASME CODE PT TANKS
2 gallon 1 gal. pail 2.8 QMS-80-1 PT-78-K60 183-3000 77-2927 45 59
5 gallon 5 gal. pail 9.8 QM-1458-1 PTL-408-K20 183-3001 77-2928 80 99
10 gallon 5 gal. pail 11.8 QM-1458-1 PTL-412-K8 183-3001 77-2928 86 105
15 gallon 5 gal. pail 19.8 QM-1458-1 PTL-415-K10 183-3001 77-2928 111 130
EST. SHIPPING
WT. FOR TANKS
WITH AGITATORS
(LBS)
EST. SHIPPING
WT. FOR
TANKS W/OUT
AGITATORS
(LBS)
SERVICE
BULLETIN
REFERENCE
BOTTOM
OUTLET KIT
DISPOSABLE
LINERHEAD GASKET
INTERNAL
VOLUME
(GAL.)
HOLDS
CONTANIER
SIZETANK SIZE
Binks ASME Code PT Tanks
A great choice in a 2-gallon pressure tank, spraying up to 80 psi of fluid pressure.
• Choose zinc-plated lid and shell options (83C-) for solvent borne materials.
• Choose stainless steel lid and zinc-plated shell options (83Z-) for waterborne materials.
Max. Working Pressure, psi 80 psi (5.5 bar)
Air Inlet 1/4 NPS (m)
Fluid Outlet 3/8 NPS (m)
Fluid Outlet if using bottom outlet kit n/a
Standard paint container that will fit inside 1 gallon
Inside diameter 9 1/2
Inside height at center 9 1/2
Overall height 20 1/2
Overall width 13 1/2
X X 83C-210
X X X 83C-211
X X 83C-220
X X X 83C-221
X X 83Z-210
X X X 83Z-211
X X 83Z-220
X X X 83Z-221
ZINK PLATED
LID AND SHELL
STAINLESS STEEL LID
AND ZINK PLATED SHELL
SINGLE REGULATED
(0-80 PSI FLUID PRESSURE)
DOUBLE REGULATED
(0-80 PSI FLUID PRESSURE,
0-100 PSI ATOMIZING
AIR PRESSURE)
DIRECT DRIVE
AGITATION
2 GALLONTANK
PART NUMBER
83C-220
83C-221
Binks Pressure Tanks
BINKS 183G- ASME CODE GALVANIZED CARBON STEEL TANKS
CAPACITY AND DIMENSIONS
SPECIFICATIONS
BINKS 183G- ASME CODE GALVANIZED CARBON STEEL TANKS – PART NUMBERS
Binks 183G- ASME Code Tanks
Give you application flexibility for most solvent-borne applications.
EST. SHIPPING
WT. FOR TANKS
WITH AGITATORS
(LBS)
EST. SHIPPING
WT. FOR
TANKS W/OUT
AGITATORS
(LBS)
SERVICE
BULLETIN
REFERENCE
BOTTOM
OUTLET KIT
DISPOSABLE
LINERHEAD GASKET
INTERNAL
VOLUME
(GAL.)
HOLDS
CONTANIER
SIZETANK SIZE
2 gallon 1 gal. pail 2.8 QMS-80-1 PT-78-K60 183-3000 77-2927 45 59
5 gallon 5 gal. pail 9.8 QM-1458-1 PTL-408-K20 183-3001 77-2928 80 99
10 gallon 5 gal. pail 11.8 QM-1458-1 PTL-412-K8 183-3001 77-2928 86 105
15 gallon 5 gal. pail 19.8 QM-1458-1 PTL-415-K10 183-3001 77-2928 111 130
Max. Working Pressure, psi 110 psi (7.5 bar)
Air Inlet 1/4 NPT (m)
Fluid Outlet 3/8 NPT (m)
Fluid Outlet if using 3/4 NPT (m) or
bottom outlet kit 3/4 NPS (m)
Standard paint
container that 1 gal. 5 gal. 5 gal. 5 gal.
will fit inside
Inside diameter 9 1/2 14 14 14
Inside height
at center 9 1/2 16 19 1⁄16 26 1⁄16
Overall height 23 1/2 30 5⁄16 33 3⁄8 43 3⁄8
Overall width 13 1/2 18 1/2 18 1/2 18 1/2
2 GALLON
TANKS
5 GALLON
TANKS
10 GALLON
TANKS
15 GALLON
TANKS
183G-200 183G-500 183G-1000 183G-1500
X 183G-210 183G-510 183G-1010 183G-1510
X X 183G-211 – – –
X X 183G-213 183G-513 183G-1013 183G-1513
X 183G-220 183G-520 183G-1020 183G-1520
X X 183G-221 – – –
X X 183G-223 183G-523 183G-1023 183G-1523
X 183G-230 183G-530 183G-1030 183G-1530
X X 183G-231 – – –
X X 183G-233 183G-533 183G-1033 183G-1533
X 183G-240 183G-540 183G-1040 183G-1540
X X 183G-241 – – –
X X 183G-243 183G-543 183G-1043 183G-1543
SINGLE
REGULATED
DOUBLE
REGULATED
SINGLE
REGULATED
WITH EXTRA
SENSITIVE
REGULATOR
DOUBLE
REGULATED
WITH EXTRA
SENSITIVE
REGULATOR
DIRECT
DRIVE
AGITATOR
15:1 GEAR
REDUCED
AGITATOR
2 GALLON
TANK PART
NUMBER
5 GALLON
TANK PART
NUMBER
10 GALLON
TANK PART
NUMBER
15 GALLON
TANK PART
NUMBER
Larger handles
for increased portability
183-523
All 183G tanks include fill port
Location lug
ensures proper
lid orientation
Binks Pressure Tanks
BINKS 183S- ASME CODE STAINLESS STEEL TANKS
BINKS 183S- ASME CODE STAINLESS STEEL TANKS – PART NUMBERS
183S-200 183S-500 183S-1000 183S-1500
X 183S-210 183S-510 183S-1010 183S-1510
X X 183S-211 – – –
X X 183S-213 183S-513 183S-1013 183S-1513
X 183S-220 183S-520 183S-1020 183S-1520
X X 183S-221 – – –
X X 183S-223 183S-523 183S-1023 183S-1523
X 183S-230 183S-530 183S-1030 183S-1530
X X 183S-231 – – –
X X 183S-233 183S-533 183S-1033 183S-1533
X 183S-240 183S-540 183S-1040 183S-1540
X X 183S-241 – – –
X X 183S-243 183S-543 183S-1043 183S-1543
SINGLE
REGULATED
DOUBLE
REGULATED
SINGLE
REGULATED
WITH EXTRA
SENSITIVE
REGULATOR
DOUBLE
REGULATED
WITH EXTRA
SENSITIVE
REGULATOR
DIRECT
DRIVE
AGITATOR
15:1 GEAR
REDUCED
AGITATOR
2 GALLON
TANK PART
NUMBER
5 GALLON
TANK PART
NUMBER
10 GALLON
TANK PART
NUMBER
15 GALLON
TANK PART
NUMBER
CAPACITY AND DIMENSIONS
Standard paint
container that 1 gal. 5 gal. 5 gal. 5 gal.
will fit inside
Inside diameter 9 1/2 14 14 14
Inside height
at center 9 1/2 16 19 1⁄16 26 1⁄16
Overall height 23 5/8 30 5⁄16 33 3⁄8 43 3⁄8
Overall width 13 3/8 18 1/2 18 1/2 18 1/2
2 GALLON
TANKS
5 GALLON
TANKS
10 GALLON
TANKS
15 GALLON
TANKS
Larger handles
for increased portability
183S-510 All 183S tanks include fill port
Location lug
ensures proper
lid orientation
EST. SHIPPING WT. FOR
TANKS WITH
AGITATORS (LBS)
EST. SHIPPING WT. FOR
TANKS W/OUT
AGITATORS (LBS)
SERVICE
BULLETIN
REFERENCE
BOTTOM
OUTLET KIT
DISPOSABLE
LINERHEAD GASKET
INTERNAL
VOLUME
(GAL.)
HOLDS
CONTANIER
SIZETANK SIZE
2 gallon 1 gal. pail 2.8 QMS-80-1 PT-78-K60 183-3000 77-2927 38 52
5 gallon 5 gal. pail 9.8 QM-1458-1 PTL-408-K20 183-3001 77-2928 69 90
10 gallon 5 gal. pail 11.8 QM-1458-1 PTL-412-K8 183-3001 77-2928 71 90
15 gallon 5 gal. pail 19.8 QM-1458-1 PTL-415-K10 183-3001 77-2928 89 108
SPECIFICATIONS
Max. Working Pressure, psi 110 psi (7.5 bar)
Air Inlet 1/4 NPT (m)
Fluid Outlet 3/8 NPT (m)
Fluid Outlet if using 3/4 NPT (m) or
bottom outlet kit 3/4 NPS (m)
Binks 183S- ASME Code Tanks
Give you application flexibility with our best chemical resistance. Suitable for waterborne coatings.
Binks ASME Code 30 and 60 Gallon Tanks
Ideal for larger jobs such as line striping or supporting multiple guns. Choose galvanized units for most applications.
Choose stainless steel fitted galvanized tanks for waterborne applications
BINKS 183G- ASME CODE 30 AND 60 GALLON TANKS
EST. SHIPPING WT. FOR
TANKS W/OUT
AGITATORS (LBS)HEAD GASKETTANK SIZE
BOTTOM
OUTLET KIT
SERVICE BULLETIN
REFERENCE FOR NON-
AGITATED TANKS
SERVICE BULLETIN
REFERENCE FOR
AGITATED TANKS
EST. SHIPPING WT.
FOR TANKS WITH
AGITATORS (LBS)
30 gallon 83-2120 83-4230 77-1345 77-1347 240 250
60 gallon 83-2122 83-4230 77-1324 77-1322 335 370
Binks Pressure Tanks
30 AND 60 GALLON TANK LINERS
BINKS 183G- ASME CODE 30 AND 60 GALLON TANKS
BINKS 183G- ASME CODE 30 AND 60 GALLON TANKS
X 83-5801 83-5701 83-5873 plus 30 gal. liner (see below) 83-5773 plus 60 gal. liner (see below)
X X 83-5807 83-5707 83-5879 plus 30 gal. liner (see below) 83-5779 plus 60 gal. liner (see below)
30 GALLON SHELL IN GALVANIZED STEEL
(FOR A STAINLESS STEEL FITTED TANK)
SINGLE
REGULATED
15:1 GEAR REDUCED
AGITATOR
30 GAL. TANK IN
GALVANIZED STEEL
60 GAL. TANK IN
GALVANIZED STEEL
60 GALLON SHELL IN GALVANIZED STEEL
(FOR A STAINLESS STEEL FITTED TANK)
X 83-1569 83-1581
X 83-2230 83-2229
TOP OUTLET
BOTTOM OUTLET
(INCLUDES BOTTOM OUTLET KIT) 30 GAL. SS LINER 60 GAL. SS LINER
CONFIGURATION... FOR A TOP OUTLET TANK, ORDER... FOR A BOTTOM OUTLET TANK, ORDER...
Galvanized 30 Gallon Tank Tank: 83-5801 or 83-5807 Tank: 83-5801 or 83-5807 plus Bottom Outlet Kit 83-4229
Galvanized 60 Gallon Tank Tank: 83-5701 or 83-5707 Tank: 83-5701 or 83-5707 plus Bottom Outlet Kit 83-4230
SS Fitted 30 Gallon Tank Tank: 83-5873 or 83-5879 plus Liner: 83-1569 Tank: 83-5873 or 83-5879 plus Liner: 83-1569 plus Bottom Outlet Kit 83-4229
SS Fitted 60 Gallon Tank Tank: 83-5773 or 83-5779 plus Liner: 83-1581 Tank: 83-5773 or 83-5779 plus Liner: 83-1581 plus Bottom Outlet Kit: 83-4230
183GZ-5200 Solvent Saver Tanks:
Flush your system with significantly less solvent by using our solvent saver tank. By injecting air into your solvent stream you gener-
ate turbulence via alternating slugs of solvent and air. This makes for a quicker flush, using less solvent. Two gallon tank size.
SPECIFICATIONS
ACCESSORIES
85-470 Air Control Assembly for 1 regulator
85-471 Air Control Assembly for 1 regulator and agitator
85-472 Air Control Assembly for dual regulation
85-473 Air Control Assembly for dual regulation and agitator
85-490 Air Control Assembly for 1 low fluid pressure regulator
85-491 Air Control Assembly for 1 low fluid pressure regulator and agitator
85-492 Air Control Assembly for dual regulation, low fluid pressure
85-493 Air Control Assembly for dual regulation, low fluid pressure and agitator
85-469 Single to double regulator kit. Convert any single regulated 183G or 183S tank to a double regulated tank.
PART NUMBER DESCRIPTION
ERGOFLEX™ HOSEFLUID ALL™ HOSE
PART NUMBER
ERGOFLEX™ HOSE
Fluid All™ Fluid Hose:
Suitable for use with solventborne and
waterborne coatings as diverse as epoxies,
urethanes, conversion varnishes, alkyds, and
latex. See our bulletin EA28-100 Accessories
Guide for additional sizes and lengths.
Ergoflex™ Fluid Hose:
Our 3/8 ID Hose is ideal for applications
requiring high volumes of air (e.g. HVLP
spraying), yet is surprisingly light and flexible.
See our bulletin EA28-100 Accessories Guide
for additional sizes and lengths.
Bottom Outlet Kits for 183G - and
183S- ASME Code Tanks:
Bottom Outlet Kits include sturdy steel
legs, mounting fasteners, fittings, and
outlet pipe. 183-3005 One Leg Plus Fasteners.
Order 1 to replace a damaged leg. Order 3 to raise
a tank without bottom outlet plumbing.
71-3303 3/8 ID x 25’ 3/8 NPS(F) Fluid
DIMENSIONS COMMECTIONS FOR PART NUMBER DIMENSIONS COMMECTIONS FOR
31-31101 3/8 ID x 25’ 1/4 NPS(F) Air
183-3000 Bottom Outlet Kit for 3/4 NTP (m) or 3/4 NPS (m)
2 Gallon Tanks
183-3001 Bottom Outlet Kit for 3/4 NTP (m) or 3/4 NPS (m)
5, 10 and 15 Gallon Tanks
PART NUMBER DESCRIPTION
FLUID OUTLET IF USING
BOTTOM OUTLET KIT
Binks is a leading global manufacturer of products and systems
for the supply, application and curing of sprayed and dispensed
materials. Binks serves a variety of industries, including automotive,
pharmaceuticals, food and beverage, and manufacturing. With
decades of experience, Binks continues to set the standard for
precision, reliability, and innovation in fluid technology solutions.
Experience the difference.
A powerful solution can start with a simple conversation
We want to help build the best solution to your application challenges. Learn more about what
we can offer by reaching out to the office nearest you.
For more information,
visit binks.com. ©2025 Binks.
Models and specifications subject to
change without notice. All rights reserved.
Form No. 03-459-01
Americas 1.800.992.4657 marketing@binks.com
EMEA 44.0.120 257.1111 marketing-eu@binks.com
China 86.21.33730108 mkt_cn@binks.com
Japan Sales Office 81.45.785.6421 jp-rans-tokyosales@binks.com
Japan Binks/DeV 81.45.785.6421 jp-binks-devi@binks.com
India/SE Asia 44.0.120 257.1111 marketing-roa@binks.com
