- Binks DX200 Diaphragm Pump [ English ]
DX200-3
Air Operated 3:1
Diaphragm Pump
• Higher fluid pressure with constant low pulse flow rates
• Durable construction, low maintenance operation
• Interchangeable outlet options
• Multiple spray gun, system and transfer applications
F L U I D H A N D L I N G
Binks
DX200-3
Competitor
Diaphragm
Pump
Piston
Pump
5:1
1.45 L
1.5 L
2.4 L
The DX200-3 is our new air operated 3:1
ratio, double diaphragm pump. It has
been designed to perform in tough spray
gun, system or transfer applications.
A cutting-edge feature of this pump is the new Eazi-Swap outlet,
which can be quickly configured as a standard outlet or adapted
with our manual fluid regulator or active surge chamber options.
The outlet can even be changed with the pump on line. This
innovation provides the flexibility for connection to systems or
direct to spray guns without the expense and complication of
external components.
High Performance, Low Running Costs
Consistent fluid delivery over the pressure range. High performance
air valve for quick change-over. Leads to high volume of fluid output
and lower air consumption than the competition.
Suitable For Piggable Systems
Low internal volume with no ‘dead areas’ makes the DX200-3 ideal
for piggable systems.
Fast & Easy Servicing
Unobstructed access to critical components such as the air valves,
diaphragms and check valves allow fast, easy maintenance.
Eazi-Swap Fluid Output
Outlet options can be ordered with the pump or retrofitted in-situe.
Fluid outlet can be rotated for front or rear fluid delivery.
Non-Stall & Quiet Running
Non-stall pilot mechanism and integrated muffler provides smooth,
quiet running.
Universal Material Compatibility
Stainless Steel fluid passageways handle widest variety of materials.
DX200-3 flushes with less
During tests, the DX200-3
was flushed out clean,
without air and with
measured solvent. The
nearest competitor used
50ccs more solvent to flush.
Standard
Outlet
Fluid
Regulator
Active Surge
Chamber
Binks DX200-3 Air Operated 3:1 Ratio Diaphragm Pump
Suitable For:
• Solvent OR Waterborne Coatings
• Primers, Sealers & Catalysed Lacquers
• Moisture-Sensitive Materials
• UV-Cure Coatings
• Abrasive Coatings
• Adhesives & Fillers
• Many others
COATING TYPES AND APPLICATIONS
GENERAL
INDUSTRY WOOD GLASS AUTOMOTIVE
OEM AND TIER 1 & 2 CERAMIC
20
18
16
14
12
10
8
6
4
2
0
P
r
e
s
s
u
r
e
(
B
a
r
)
DX200-3 Output Pressure Comparison – 0.53 gal/min, 215 psi Average
Competitor Diaphragm Pump 1 Competitor Diaphragm Pump 2 DX200-3
The 'longer—slower' cycle rate of the
DX200-3 moves the same volume of
fluid but at a slower cycle rate than its
competitors. This means less stress
and wear on components, resulting in
longer intervals between maintenance
inspections.
Outstanding Performance
The DX200-3 was tested at a fluid pressure of 215 psi and a flow rate of 0.53 gallons
per minute against the main competition. The DX200-3 had the quickest change-over
period and least pressure loss of its rivals.
Easy to Maintain
Rotatable Eazi-Swap outlet.
Change on line between
unregulated, regulated
or active surge chamber
outlets.
High performance valve
gives quick change-
over, providing superior
performance.
No-Crease diaphragm
design for longer working
life. The gentle action
ensures low shear of
sensitive materials.
Minimal disassembly for
fast easy maintenance,
even while the pump is
still on line.
Easy access,
single module,
air valve pilot.
Built-in pump
pressure gauge
as standard.
Long life check
valve with low cost
seal, allows for
easy preventative
maintenance.
Binks DX200-3 Air Operated 3:1 Ratio Diaphragm Pump
A powerful solution can start with a simple conversation
We want to help build the best solution to your application challenges. Learn more about what
we can offer by reaching out to the office nearest you.
For more information,
visit binks.com. ©2025 Binks.
Models and specifications subject to
change without notice. All rights reserved.
AMPM-25BINKS128 | Form No. 03-488-01
Americas 1.800.992.4657 marketing@binks.com
EMEA 44.0.120 257.1111 marketing-eu@binks.com
China 86.21.33730108 mkt_cn@binks.com
Japan Sales Office 81.45.785.6421 jp-rans-tokyosales@binks.com
Japan Binks/DeV 81.45.785.6421 jp-binks-devi@binks.com
India/SE Asia 44.0.120 257.1111 marketing-roa@binks.com
DX200 PUMP SPECIFICATION (BARE PUMP)
Ratio 3:1
Max Air Pressure 100 psi (7 bar)
Max Fluid Pressure 305 psi (21 bar)
Nominal Flow Volume/Cycle 0.037 gal (0.14 L)
Fluid Output @60 cycles/min 2.2 gal/min ( 8.4 l/min)
Max Recommended Continuous Cycle Rate 25 Cycles/min
Max Recommended Intermittent Cycle Rate 40 Cycles/min
Inlet Fluid Connection 1/2 BSPP Female
Outlet Fluid Connection 1/2 BSPP Female
Maximum Dry/Wet Lift (Head) 22.6ft (6.9m)/28.5 ft (8.7m)
Air Inlet 1/4 Universal (BSPP/NPSM) Female
Air Volume/cycle @ 6.9Bar/100psi 0.18 SCFM (47.8 l)
Air Flow @ 10 cycles/min 6.9Bar/100psi 1.69 SCFM (47.8 l)
Air Flow @ 30 cycles/min 6.9Bar/100psi 5.54 SCFM (156.9 l)
Air Quality ISO 8573.1 Class 3.3.2 # Dirt 5 microns
Water -20°C @ 100 psi (940 ppm)
Oil 0.1mg/m3
Non Lubricated
Noise Level 79.8 dBA
Weight - Bare Pump 39.4 lbs (17.9 Kg)
Temperature Range 32 - 104 °F (0 - 40 °C)
Dimensions (W x H x D) 7.6 X 10.35 X 10.4 (193mm X 262mm X 264mm)
DX200-3 ORDERING INFORMATION
DX200-3SN Pump with no Regulator
DX200-3SM Pump with Manual Regulator
DX200-3SP Pump with Active Surge Chamber
DVX-352 Wall Bracket
0115-010186 Cart Mount (also order wall bracket)
ACCESSORIES
DESCRIPTION PART #
Manual Fluid Regulator DXK-274
Active Surge Chamber DXA-SC31P
Active Surge Chamber Air Reservoir DXA-SCR1.0
Non Regulated Outlet DXK-279
Fluid Filter DXA-F6ME100-200-3
1/2 Suction Hose DXA-S25-13S-me15
FILTER SCREENS
DESCRIPTION PART #
100 Mesh Kit x 3 (150 Micron) 1194549-K3
200 Mesh Kit x 3 (75 Micron) 194551-K3
60 Mesh Kit x 3 (250 Micron) 194548-K3
30 Mesh Kit x 3 (595 Micron) 194547-K3
Other sizes are available
Filter Option
DX200-3 can be ordered with a filter (rated
up to 305 psi) which can be secured neatly
against the pump’s wall bracket, saving
on installation time. The filter
may also be ordered as an
accessory item for retro-
fitting.
This new inline filter gives
superior flushing. Sanitary
clamps enable quick
disconnection of the filter
housing for inspection and
cleaning the screen. A bypass
valve is included to enable
easy priming of the pump.
A 100 mesh filter screen
is included as standard
but alternative mesh sizes
are available to suit the
application. Sizes range from
15, through to 1250.
Binks DX Series
5-Year Warranty
Binks® warrants to the original end-use
purchaser that the Binks branded products
DX shall not fail under normal use and
service due to a defect in material or
workmanship within five (5) years from
the date of shipment from Binks. Does not
include normal wear and tear parts.
For further technical information refer
to the Binks DX200 Diaphragm Pump
Service Bulletins.
F
IV
E
Y
E
A
R
L
IM
IT
ED PRODUC
T
W
A
R
R
A
N
T
Y55
Binks DX200-3 Air Operated 3:1 Ratio Diaphragm Pump
