LVMP gun makes higher transfer efficiency and better atomization possible with less air consumption.
The difference of the transfer efficiency between standard spray gun and HVLP gun is the air velocity. The both air velocities are in the same sound-speed area when an instant of coming out from the air cap. However, when it becomes the distance of approximately 200mm, it generates large difference.
Therefore, if the velocity is low at 200mm distance, the transfer efficiency becomes better even atomized with higher air pressure than HVLP.
| Gun Types | Gun Inlet Pressure | Air Cap Pressure | Air Consumption | Air Velocity | Transfer Efficiency |
|---|---|---|---|---|---|
| AGXV-541-5805-DFX (LVMP Gun) | 0.25MPa | 0.20MPa | 280L/min | 16m/sec. | 74% |
| AGXV-541-46-FX (HVLP Gun) | 0.45MPa | 0.09MPa | 750L/min | 19m/sec. | 55% |
| AGX-550-777-FX (Standard Gun) | 0.40MPa | 0.35MPa | 500L/min | 22m/sec. | 44% |
(Spray Distance=200mm)
| Atomization Air Pressure (Gun Inlet) | 0.4MPa (4.0kgf/cm²) |
|---|---|
| Fluid Pressure | 0.7MPa (7.0kgf/cm²) |
| Working Pressure | 0.35 ～ 0.7MPa (3.5 ～ 7.0kgf/cm²) |
| Weight | 510g |
| Fluid Inlet | R1/8 |
| Cylinder Air Inlet (CYL) | R1/8 |
| Atomization Air Inlet (CAP) | R1/8 |
| Pattern Air Inlet (FAN) | R1/8 |
| Measurement | L92 × W40 × H40mm |
| Fluid Tip Size | Air Cap No. | ||
|---|---|---|---|
| 805 | 807 | 805MT | |
| GD (0.7mm) | ✔ | ✔ | G (0.7mm) |
| DFX (1.1mm) | ✔ | ✔ | FX (1.1mm) |
| DFW (1.6mm) | ✔ | ✔ | – |
| Spray Pattern (Spray Distance=200mm) | 220mm (DFX) | 300mm (DFX) | 180mm (FX) |
We are here to help you find the best solution to fit your specific applications challenges.
