Overview
Features
The color contamination seeps into cleaning solvent and is drained from fluid passage. Flow Rate of cleaning solvent at center of fluid hose is faster than the one near inside fluid passage. Then It takes color contamination a while to seep into cleaning solvent. Cleaning solvent mixed air flow rapidly through fluid passage with particle of cleaning solvent striking hard against inside fluid passage. This results in clean and dry fluid passage using less cleaning solvents and time.
Comparison of cleaning time
| ■Flush out low viscosity | Cleaning time |
|---|---|
| *Flush with Quick cleaner | 6.6 seconds |
| * Flush with thinner | 8.3 seconds |
| ■Flush out high viscosity | |
| * Flush with Quick cleaner | 11.5 seconds |
| * Flush with thinner | 14.7 seconds |
Test Condition:
- Viscosity : 12 seconds/IHS (low viscosity), 36 seconds/IHS (high viscosity)
- Hand Spray Gun Fluid Tip Size : 1.0 mm
- Fluid hose : PTFE 6×4 mm
- Fluid hose length : 2.5 m
