Resource Library
Trophy Automatic Guns 03-356-01
- Trophy Automatic Guns 03-356-01 [ English ]
Finish With A Trophy
Trophy Series
Application
Versatility and
Consistent
Championship
Performance –
That’s What You
Can Expect From
Binks Trophy
Series Equipment. Fluid Nozzles and Needles Binks Trophy
Series Spray Guns can be outfitted with
a variety of fluid tips designed and
manufactured to handle a broad range
of application materials. These include:
FLUID TIP
Our stainless steel fluid nozzles are hardened and last
20% longer.* The stainless steel fluid nozzles are used
for general purpose and a wide variety of coatings.
Size range: .5 to 2.6 (mm)
PLASTIC
Plastic needles are typically used for very thin
materials including NGR stains.
Size Range: .5 to 2.6 (mm)
TUNGSTEN CARBIDE
Tungsten carbide nozzles and needles are typically
used for abrasive materials such as porcelain and
ceramics.
Sizes: 1.4, 1.8, 2.2, 2.6 (mm)
Anatomy Of A Champion
• Application Versatility
• Robust Design
• Ergonomics
*Based on internal testing of existing Binks and competitor
stainless steel. Tested over 1 million cycles.
The Binks Trophy Series Line of Spray Guns Offer
Unparalleled Robustness For Industrial Coating
and Finishing Requirements. Combined with our
comprehensive and compatible fluid nozzle and needles
- including our hardened stainless steel Tuff Tip, plastic
needle tips, and tungsten carbide – Trophy series spray
equipment is fully capable of spraying the widest range
of materials and viscosities.
Application Versatility and Consistent Championship
Performance – That’s What You Can Expect From Binks
Trophy Series Equipment.
Whatever size job or part you’re finishing – whatever material you’re spraying – Binks
Trophy Series spray guns provide the technology and confidence needed for most
jobs and coatings.
AIR CAP
• HVLP, LVMP, Conventional
• Three spray technologies can be used on
the same gun platform
• Balanced and uniform pressure and
distribution inside the air cap produces
uniform spray particle distribution
• Tuff Tip Hardened fluid nozzles last longer
OPTIONAL
• Air cap pin available for Air cap
positioning
• Easy-grip air cap ring for easy removal
and installation
• Stainless steel fluid passages for wide
variety of materials
• Long life seal lasts twice as long than
typical seals
• Needle knob can be used to remove
piston for convenience
• Needle seal cartridge assembly can be
removed as one complete assembly
ONE STAINLESS STEEL NEEDLE FOR ALL
FLUID NOZZLES REDUCES INVENTORY
Binks is a leading global manufacturer of products and systems
for the supply, application and curing of sprayed and dispensed
materials. Binks serves a variety of industries, including automotive,
pharmaceuticals, food and beverage, and manufacturing. With
decades of experience, Binks continues to set the standard for
precision, reliability, and innovation in fluid technology solutions.
Experience the difference.
A powerful solution can start with a simple conversation
We want to help build the best solution to your application challenges. Learn more about what
we can offer by reaching out to the office nearest you.
For more information,
visit binks.com. ©2025 Binks.
Models and specifications subject to
change without notice. All rights reserved.
Form No. 03-536-01
Americas 1.800.992.4657 marketing@binks.com
EMEA 44.0.120 257.1111 marketing-eu@binks.com
China 86.21.33730108 mkt_cn@binks.com
Japan Sales Office 81.45.785.6421 jp-rans-tokyosales@binks.com
Japan Binks/DeV 81.45.785.6421 jp-binks-devi@binks.com
India/SE Asia 44.0.120 257.1111 marketing-roa@binks.com
Finishing at the Front:
Trophy Series Air Caps Attain
Industry Leadership
Binks engineering has developed a
broad selection of air caps to ensure
our ability to provide customers with the
right gun with the perfect air cap for the
job. The new air cap designs provide
uniform spray patterns with consistent
atomization from top to bottom.
HVLP
31-H 22-L 11-C
10.5 @ 10 PSI 11.2 @ 30 PSI 14.2 @ 50 PSI
32-H 23-L 12-C
15.5 @ 10 PSI 10.6 @ 30 PSI 12.1 @ 50 PSI
33-H 25-L 14-C
11.0 @ 10 PSI 14.7 @ 30 PSI 24.4 @ 50 PSI
39-H B1 16
8.75 @ 10 PSI 7.8 @ 30 PSI 7.8 @ 50 PSI
C1
6.4 @ 10 PSI
PSI’s are specified
at the cap PSI’s are specified at the gun inlet
Transfer Efficiency Meets Regulatory Equal to or better Less than HVLP
Standards than HVLP and LVMP
Fluid Flow Good Better Best
Tip Range .85mm to 1.8mm .5mm to 1.8mm 1.0mm to 2.6mm
LVMP CONVENTIONAL
Air Cap CFM
