- TEKNA COPPER SELL SHEET - F-1180-A [ English ]
PRECISION
• Even material distribution for fewer
coats, increased productivity
• High transfer efficiency - saves
materials, saves money
• Digital gauge for accuracy and
repeatability
VERSATILITY
• Waterborne basecoats –
All Climates
• Solvent basecoats – All brands
• Clearcoats – High, Medium, and
Low Solid
TEKNA® Copper
Gravity Feed
Basecoat/Clearcoat
Spray Gun, by
DeVilbiss®
TEKNA Copper Models
MODELS INCLUDE:
• TEKNA® Copper Basecoat/Clearcoat Spray Gun
• 7E7 High Efficiency Air Cap
• Digital Gauge w/ Air Adjusting Valve (HAV-555)
• Gun Wrench
• Color ID rings
Chart 2: Fluid Nozzle & Fluid Needle
Replacement Parts
Fluid Nozzle Fluid Nozzle/
Size I.D. (mm) Needle Set No.
1.1 702711
1.2 702712
1.3 702713
1.4 702714
1.5 702715
NOTE: When replacing the fluid nozzle or fluid
needle, replace both at the same time. Lightly
lubricate the threads of the fluid nozzle before
reassembling. Torque 14–16 nm (10–12 ft-lbs).
Don’t over tighten the fluid nozzle. Use 10 mm
wrench supplied with gun.
OTHER SALABLE PARTS /ACCESS ORIES
Wrench (10 & 14mm) 702740
Seal and Pin Kit (Kit of 5)
(Items 20, 22 and 24.) 192229
Air Adjusting Valve 702737
* The TEKNA Spray Gun Repair Kit (702736)
contains all the parts indicated with an asterisk.
Chart 1: Air Cap Replacement Parts
Air Cap Recommended Air Flow
Order No. Application Air Cap No. Inlet Pressure Bar /Psi Lpm/Scfm
702723 Base coats #202 HVLP 1.2–1.5 BAR/18–22 PSI 382–434 LPM
13.5–15.5 SCFM
702724 Clearcoats #909 HVLP 1.5–1.8 BAR/22–26 PSI 396–453 LPM
Waterborne Base 14–16 SCFM
703062 Base coats, #7E7 HE 1.1–1.5 BAR/16–22 PSI 255–312 LPM/9–11 SCFM
Clearcoats (HVLP approved areas) (HVLP approved areas)
1.5–2.0 BAR/22–30 PSI 312–368 LPM11–13
(non–HVLP approved areas) SCFM
(non–HVLP approved areas)
Ref.
No. Description Part No. Qty
1 Air Cap Retaining Ring 1
2 Slip Ring 1
3 Air Cap 1
4 Air Cap Retaining Clip 191972 1
5 Retaining Ring Seal 1
6 Air Cap and Ring See Chart 1
7 Air Cap Retaining Ring & Seals 702725 1
8 Fluid Nozzle See Chart 2 1
9 Air Separator 1
*10 Air Separator Seal (kit of 2) 702726 1
11 Air Separator & Seal Kit 702727 1
*12 Body Bushing Gasket 1
13 Body Bushing 1
14 Body Bushing & Gasket 702728 1
15 Fluid Needle 1
*16 Needle Spring 1
*17 Needle Spring Pad 1
18 Fluid Adjusting Knob 1
19 Fluid Adjusting Knob,
Spring,& Pad Kit 702729 1
*20 Retaining Clip 1
21 Spreader Valve Body 1
*22 Spreader Valve Seal 1
23 Spreader Valve Adjusting Knob 1
*24 Spreader Valve Pin 1
25 Spreader Valve Assembly 702730 1
*26 Needle Packing 1
*27 Packing Spring 1
*28 Packing Nut 1
29 Packing, Spring & Packing Nut Kit 702731 1
30 Air Valve Body 1
31 Air Valve Cage 1
32 Air Valve Poppet 1
33 Air Valve Spring 1
34 Air Valve Spring Pad 1
35 Air Valve Seal 1
36 Air Valve Assembly 702732 1
*37 Trigger Stud Screw (T20 Star) 1
38 Trigger 1
*39 Trigger Stud 1
40 Trigger, Stud & Screw Kit 702733 1
41 Plug 1
42 Air Inlet 702734 1
43 Colour ID Ring Kit (4 Colours) 702735 1
44 Gun Body 1
F-1180-AAUTOMOTIVE REFINISHING
email: askus@devilbissar.com
Customer Service: 800-445-3988
www.autorefinishdevilbiss.com
Order No. Air Cap Needle/Nozzle Cup Type
703661 TEKNA Copper 7E7 (HE) 1.3, 1.4 Uncupped includes Adapter
703662 TEKNA Copper 7E7 (HE) 1.3, 1.4 900 cc Aluminum
703675 TEKNA Copper 7E7 (HE) 1.2, 1.3 Uncupped includes Adapter
703676 TEKNA Copper 7E7 (HE) 1.2, 1.3 900 cc Aluminum
