- DEVILBISS-FLG4-A54-113 [ English ]
Gravity, Pressure and Siphon Spray Guns
featuring Disposable Cup System
The Professional’s Choice
A54-113R
F L E X I B I L I T Y • A F F O R D A B I L I T Y • D U R A B I L I T Y
NEW!
Spray Guns
When your project requires a fine factory finish,
you immediately think of DeVilbiss and its
reputation for quality. The value priced FinishLine
gun series works with a wide variety of materials
to form well atomized, uniform spray patterns. Its
stainless steel needle and fluid nozzles and brass
air caps guarantee that your FinishLine gun will
maintain its performance job after job...
HVLP VS CONVENTIONAL TECHNOLOGY
• HVLP guns deliver a high volume of
air at 10 psi or less. This results in a
softer spray pattern and a higher
transfer efficiency. You save time and
money as more paint goes onto the
part and less is lost to overspray and
bounceback.
• Conventional air spray guns
provide a high quality finish
while delivering an airstream
of 30-50 psi. This higher psi
rate is beneficial for heavier
(higher viscosity) materials.
The DeKups® liner features
high collapsibility, so all
the paint is moved
through the gun and onto
the job. Save time and
money, increase
productivity, and waste
less paint.
• Fan control adjusts spray pattern
from 10 to round
• Waterborne compatible parts
• Forged Aluminum, anodized body
for maximum durability
• Precision machined air caps and fluid nozzles
provide a high quality finish
• Conventional or HVLP models
• Gravity & Siphon models feature DeKups disposable
cup systems
• Ergonomic handle reduces stress
• Storage case keeps all your equipment neat and
ready to use
• Fluid control knob allows for fluid adjustment
• Additional fluid nozzle sizes are sold separately
(1.3mm, 1.5mm, 2.2mm)
Reduces material waste Fluid weight below the gun
Flexible enough to use on
small jobs or in high production
For high quantities of paint and larger jobs
MGQ PRESSURE CUP
A quality finish at a budget price
Each Spray Gun
Comes With:
• Internal mix air
cap for spatter
• External mix air cap
for smooth factory
finishes
• Metal one quart
pressurized cup
• Fluid control knob
Each Pressure Kit
Contains:
Protective Carrying Case
1 FinishLine Spray Gun
1 Spray Gun Cleaning Kit
Each Siphon Kit
Contains:
Protective Carrying Case
1 FinishLine Spray Gun
1 DeKups® Adaptor
1 DeKups® Reusable Cup
4 DeKups® Liners
1 Measuring Guide
1 Orange Plug
Each Gravity Kit
Contains:
Protective Carrying Case
1 FinishLine Spray Gun
1 DeKups® Adaptor
1 DeKups® Reusable Cup
4 DeKups® Liners
1 Measuring Guide
1 Orange Plug
Perfect for Craftsmen,
Contractors or Certified painters
PRESSURE FEED
GRAVITY FEED SIPHON FEED
Refer to Service Bulletin SB-2-779 Refer to Service Bulletin SB-2-777
Refer to Service Bulletin SB-2-777 Refer to Service Bulletin SB-2-006
La
te
x
En
am
el
s
Po
ly
ur
et
ha
ne
Co
nt
ac
t A
dh
es
iv
e
H E A V Y
Ep
ox
ie
s
Va
rn
is
he
s
Th
in
ne
d
La
te
x
To
pc
oa
t L
ac
qu
er
M E D I U M
Se
al
er
s
W
as
h
Pr
im
er
s
St
ai
n
N
it
ro
L
ac
qu
er
L I G H T
Siphon Feed HVLP
Order # FLG-HVS-322
Tip Included: 2.2mm
Recommended: 13 CFM / 23 PSI
Siphon Feed Conventional
Order # FLG-CNS-115
Tip Included: 1.5mm
Recommended: 9.9 CFM / 40 PSI
Pressure Feed HVLP
Order # FLG-HVP-315
Tip Included: 1.5mm
Recommended: 13 CFM / 23 PSI
Gravity Feed HVLP
Order # FLG-HVG-315
Tip Included: 1.5mm
Recommended: 13 CFM / 23 PSI
Gravity Feed Conventional
Order # FLG-CNG-115
Tip Included: 1.5mm
Recommended: 9.9 CFM / 40 PSI
MGQ Pressure Feed
Order # FLG-MGQ-700-FL
Internal & External Mix Air Cap
Tip Included: 1.4mm
Recommended: 2.6 CFM / 30 PSI
NOTE: Chart recommendations were achieved with 10-13 CFM of air between 15 and 40 PSI. Results may vary depending
upon size of compressor and air hose used. DeVilbiss recommends 3/8 hose and fittings for best results when spraying with
HVLP guns. For best results, a 3 HP or larger compressor is recommended. Smaller compressors will have reduced
performance in the form of coarser atomization and smaller patterns.
ONE YEAR
L
IM
I T E D W A R R A
N
T
Y
over 30 secs. #2 Zahn Cup
MATERIAL:
SPRAY GUN MODEL:
19-30 secs. #2 Zahn Cup 14-20 secs. #2 Zahn Cup
DeVilbiss DeKups Disposable Cup System
U.S. PATENT NOS. 6,820,824 AND 7,374,111 OWNED BY 3M INNOVATIVE PROPERTIES CO.
ADDITIONAL U.S. PATENTS: NOS. 7,380,680; 7,354,074; 7,353,964; 7,350,418; 7,344,040; 7,263,893; 7,165,732; 7,086,549.
www.devi lb iss .com
© 2013 DeVILBISS • Printed in USA • All Rights Reserved • A54-113R (02/13)
Sales and Service Through A Global Network of Industrial Distributors
North American Industrial Office
195 Internationale Blvd.
Glendale Heights, IL 60139 USA
630-237-5000
Toll Free Customer Support and Technical Assistance
800-992-4657 USA & Canada Only
Toll Free Fax
888-246-5732 USA & Canada Only
Spray Gun Finishing Guide
Choose the right gun for your application:
