- Century FRP Literature A101-92 [ English ]
Gel Coat & Resin Laminating
Advanced technologies and equipment
for today’s MACT-compliant
composites applications
The Binks Century FRP Equipment Platform
The addition of the new Century Pump to the Binks LEL, or Low Emission Laminator technology
provides a complete selection of FRP spray guns, spray tips, air nozzles and mixing valves for
the non-atomizing application of resins and gel coats used in open molding processes.
MACT Compliance
Of critical importance to composites manufacturers is
the use of EPA Compliant Maximum Achievable Control
Technologies in their operations. One such technology
used in Binks Century LEL Spray Guns is non-atomizing resin
application, or NARA.
Through extensive testing using guidelines from the ACMA’s
Styrene Emissions Test Protocol, Binks Century LEL guns
have been tested and all been proven to emit monomer at
or below the levels predicted equations per EPA guidelines.
Binks Century LEL Spray Gun product line meets or
exceeds the EPA’s definition of Non-Atomizing Mechanical
Application per the Composites NESHAP.
The complete emissions test report is available from Finishing Equipment Americas upon request.
Binks Offers the Very Best Production Systems
Our total commitment to the composites and protective coating industries provides our customers with
many production and environmental advantages. Our full line of MACT Compliant LEL systems, spray
guns, and components consistently delivers the kind of high quality, bottom-line results needed by
manufacturing today. Users can expect:
• Benefits from lower overspray
• �Increased transfer efficiency results in
material savings
• �A cleaner workspace and lower worker
exposure to fumes and mist
• Less frequent booth filter changes
• Benefits from lower fluid pressure
• Less pump wear - seals, other sliding parts
• �Lower air motor pressure results in lower
compressed air consumption
New Design Optimized for your Application
The Binks Century resin and catalyst pump features several new innovations, designed to provide dependable,
long lasting performance under the most demanding production environments, including:
Superior air motor, resin pump
and catalyst pump design and
construction provide more time
between maintenance events
AX motors have a magnetic
detent to provide stall-free
operation and can run without
lubrication
Quick-connect couplings
and adapter-plate mounting
of subs makes change-out
fast and easy
Easy-to-rebuild
sub-assemblies and
non-adjustable u-cup seals
make rebuilds
simple and quick
The best materials of
construction provide longer
life and fewer repairs
CX2017HC-B2M1S25 � � � � � �
CX2017HC-B2M1T25 � � � � � �
CX2017HC-00M0S00 � � �
CX2017HC-00M0T00 � � �
CX2006HC-J2M0T25 � � � �
CX2006HC-L2M0T25 � � � � �
CX2006HC-L3M0T25 � � � � �
CX2006HC-R3M0T25 � � � � �
CX2006HC-U3M0T25 � � � � �
CX2006HC-00M0T00 � � �
CX2006HC-01M0T00 � � �
17
:1
Ra
tio
6.5
:1
Ra
tio
10
2-
36
10
E
xt
er
na
l M
ix
Ce
nt
ur
y G
el
C
oa
t G
un
10
2-
36
00
E
xt
er
na
l M
ix
Ce
nt
ur
y W
et
O
ut
R
es
in
G
un
10
2-
38
00
-1
In
te
rn
al
M
ix
Ce
nt
ur
y W
et
O
ut
G
un
10
2-
36
55
E
xt
er
na
l M
ix
Ce
nt
ur
y C
ho
p
Gu
n
10
2-
38
25
-1
In
te
rn
al
M
ix
Ce
nt
ur
y C
ho
p
Gu
n
Sm
al
l C
ar
t
W
al
l-M
ou
nt
ed
W
al
l-M
ou
nt
ed
w
ith
B
oo
m
Ca
rt,
M
as
t,
&
Bo
om
5 G
al
lo
n
Si
ph
on
K
it
55
G
al
lo
n
Si
ph
on
K
it
He
at
er
K
it
25
Fo
ot
H
os
e
Se
t
PART NUMBER
Pressure Ratio 6.5:1 17:1
Flow Rate at 60 cycles per minute 2.0 GPM (7.6 l/min)
Supports 1 Century Spray Gun–62 LEL tip or .036 AA tip
Displacement per cycle 4.26 oz (126 cm3)
Inlet Fluid Connection 1 NPT (f) or 1¼ NPT (m)
Outlet Fluid Connection 1/2 NPT (f)
Air Connection 3/8 NPT (f)
Wetted Materials Resin Pump Anodized Aluminum, Plated Carbon Steel, Stainless Steel,
Hard Chrome, Nylon, PTFE, UHMWPE, Tungsten Carbide
Wetted Materials Catalyst Pump Stainless Steel, Silicone Rubber, PTFE, UHMWPE
Max Fluid Pressure with included air motor 750 psi (52 bar) 1970 psi (136 bar)
Max Air Inlet Pressure 116 psi (8 bar)
Max Recommended Cycle Rate Up to 40 Cycles/minute—not continuous
Noise Level 96 dB(A) 97 dB(A)
Specifications
CX2006HC CX2017HC
Standard
systems
include:
6.5:1 with internal mix
Century wet out gun
4
17:1 with external mix
Century gel coat gun
5
Other configurations available; please
contact your Binks representative.
6.5:1 with external mix
Century wet out resin gun
2
6.5:1 with external mix
Century chop gun
3
6.5:1 with internal mix
Century chop gun
1
17:1 External Mix
Gel Coat System
Minimize
�pump force
�losses with
poppet
valves
Get the
air out
fast� with
quick
dump
valves
Quick �Switchover
�with� Patented
�Magnetic� detent
�spool valve
Get a responsive
�fluid section with
�ball checks optimized
for medium �to heavy
viscosity materials
Enjoy�
operational
success �with
durable
fluid section
Easier maintenance
with easily accessible
packings and seats. No
tiny parts to handle.
Adjustable PTFE
upper packings
provide long life
without weeping
Stepped displacement
rod design means
only one wear part —
simple and reliable
All 316 stainless steel
construction for ultimate
chemical compatibility
and long life.
CATALYST
PUMP
AIR MOTOR
FLUID SECTION
Ge
l C
oa
t
W
et
-O
ut
Ch
op
Gr
an
i-C
oa
t
Fi
lle
d
Re
si
n
2K
A
dh
es
iv
es
Ex
te
rn
al
M
ix
In
te
rn
al
M
ix
To
uc
h-
Up
Co
nv
en
tio
na
l S
pr
ay
HV
LP
S
pr
ay
102-2400 � � �
102-2500 � � �
102-2545 � � � �
102-2455 � � �
LEL LOW EMISSIONS LAMINATOR
102-3600 � �
102-3610 � �
102-3655 � �
102-3650 � � �
102-3665 � � �
102-3800-1 � �
102-3800-2 � �
102-3825-1 � �
102-3825-2 � �
102-3835-1 � � �
102-3835-2 � � �
HVLP
MACH 1PC � � �
MACH 1PCX � � � � �
CONVENTIONAL SPRAY
7N 68SS x 302 � � �
7N 68SS x A68PB � � � � �
2100 GW � � � �
A-AA AIR ASSISTED AIRLESS HVLP
EXT MIX RES
EXT MIX GEL
INT MIX RES
WET-OUT 102-3800-1 LEL RESIN 1 MIXER 77-2914 PLASTIC 1/4 NPSM 118
INTERNAL WET-OUT 102-3800-2 LEL RESIN 2 MIXER 77-2914 PLASTIC 1/4 NPSM 118
MIX GUNS CHOPPER 102-3825-1 LEL RESIN 1 MIXER 77-2914 PLASTIC 1/4 NPSM 118
FOR CHOPPER 102-3825-2 LEL RESIN 2 MIXER 77-2914 PLASTIC 1/4 NPSM 118
RESINS CHOPPER 102-3835-1 LEL FILLED RESIN 1 MIXER 77-2914 CARBIDE 3/8 NPSM 118
CHOPPER 102-3835-2 LEL FILLED RESIN 2 MIXER 77-2914 CARBIDE 3/8 NPSM 118
WET-OUT 102-2400 A-AA HVLP 77-2520 PLASTIC 1/4 NPSM 108
EXTERNAL WET-OUT 102-3600 LEL RESIN 77-2772 PLASTIC 1/4 NPSM 118
MIX GUNS WET-OUT 102-3650 LEL RESIN 77-2772 CARBIDE 3/8 NPSM 118
FOR CHOPPER 102-2455 A-AA HVLP 77-2520 PLASTIC 1/4 NPSM 108
RESINS CHOPPER 102-3655 LEL RESIN 77-2772 PLASTIC 1/4 NPSM 108
CHOPPER 102-3665 LEL FILLED RESIN 77-2772 CARBIDE 3/8 NPSM 108
EXTERNAL GEL-COAT 102-2500 A-AA HVLP 77-2520 CARBIDE 1/4 NPSM 108
MIX GUNS GEL-COAT 102-2545 VINYL ESTER A-AA HVLP 77-2753 CARBIDE 3/8 NPSM 108
FOR GEL-COAT GEL-COAT 102-3610 LEL GEL-COAT 77-2772 CARBIDE 1/4 NPSM 118
HOW TO ORDER BINKS CENTURY SPRAY GUNS
CENTURY GUN PART FEED TUBE TIP
PROCESS SPRAY GUN PART # DESCRIPTION SHEET SEAT CONNECTION SERIES
FRP Spray Gun Selection Guide
MACT-compliant
low emission laminators
• �Uniform, consistent, reliable mix
• �Internal or External mix of catalyst
and resin available
• �One-touch flush for easy cleaning
• �Cartridge resin needle and seat
assembly
• �Resin cartridge needle assembly
changes out in less than five minutes
This chart will help you quickly assess
which Binks spray gun is suitable for your
specific application. First, decide what type
of spray gun you need. Then, under the
heading that meets these criteria, find the
usage description that best matches your
application.
FRP Gun Information
Please specify spray tips when ordering Binks FRP spray guns.
The tip chart below identifies respective tips that you will need to include with your order.
Part No.
102-3655
Part No.
102-3610
Binks Century LEL
External Mix Gel Coat
Gun is renowned for its
easy operation and
low maintenance.
Binks Century
LEL External Mix
Chopper gun
Binks Internal Mix
Century LEL
Wet Out Gun
Part No.
102-3800-1
© 2011 Finishing Equipment Americas • Printed in USA • All Rights Reserved • A101-92 (03/2011)
www.binks.com
Sales and Service Through A Global Network of Industrial Distributors
North American Office
Finishing Equipment Americas
195 Internationale Blvd.
Glendale Heights, IL 60139 USA
630-237-5000
Toll Free Customer Support and Technical Assistance
800-992-4657 USA & Canada Only
Toll Free Fax
888-246-5732 USA & Canada Only
