Overview
Introducing our latest innovation — Binks® premium elevator systems — providing a plug ‘n’ play elevator system configured to work out of the box (does not apply to tote elevators), saving installation and assembly time.
The Binks® premium elevator systems are fully configurable, and assembled to your specifications, to meet the demands of any production installation. They utilize the Binks® range of pumps and agitators to offer the best fluid handling delivery system, and include a
host of operator and safety features. All Binks® elevators feature an anti-twist mechanism, and sturdy construction and they are designed for use with both solvent- and water-based materials.
They come with various hose management options (cable carrier, flexible conduit and coiled hoses), and lids contain cutouts and inspection hatches. The elevators are Machinery- and ATEX-approved for use in Zones 1 and 2.
- Smooth speed-controlled operation reduces “bouncing and movement”
- Reinforced drum lid supplied dependent on configuration
- Elevator, agitator and pump controls in one place
- Flush push buttons prevent accidental operation
- Controls can be configured either left- or right-hand
- All models feature an anti-twist mechanism, sturdy construction and are designed for use with both solvent-based and waterborne materials
- Air inlet manifold is included as standard to allow quick connect and pre-installed air connection of agitator and pump which is accessible from either left- or right-hand side of elevator shaft
- Lockable inspection hatch to keep untrained operators away from the drum interior
- Safety interlocks automatically stop the pneumatic or electric agitator from operating when the drum lid is raised
- Concealed agitator interlock design prevents operator tampering without the correct tools
- Speed controller ensures a slow and controlled descent of the drum lid — whatever the weight!
- Flush mounted up/down controls prevent accidental operation
- Controls can be configured right- or left-handed
- Elevator, agitator and pump controls in one place
DX200 1:1 DIAPHRAGM PUMP
- Aluminum or stainless steel
- Max fluid pressure 7 bar (100 psi)
- Continuous fluid delivery 5 L/min (1.25 gal/min)
DX200 3:1 DIAPHRAGM PUMP
- Stainless steel
- Max fluid pressure 21 bar (305 psi)
- Continuous fluid delivery 3.5 L/min (0.9 gal/min)
MAPLE 15/3 HORIZONTAL PISTON PUMP
- Stainless steel
- Max fluid pressure 21 bar (305 psi)
- Continuous fluid delivery 7.5 L/min (2 gal/min)
25 L/5 GAL DIRECT DRIVE
- 80 mm (3″) diameter
- Standard shaft 343 mm (13.5″)
- Short shaft 305 mm (12″)
205 L/55 GAL DIRECT DRIVE
- Twin paddle
- Shaft 753 mm (29.6″)
- 150 mm/5.9″ diameter
205 L/55 GAL GEARED DRIVE
- IEC71 or NEMA 56C motor flange mount
- Twin paddle
- Standard or long-life motor
- Shaft 800 mm (31.5″)
- 200 mm (7.87″) diameter
25 L/5 GAL GEARED DRIVE
- IEC71 or NEMA 56C motor flange mount
- Shaft 400 mm (15.7″)
- 120 mm (4.7″) diameter
205 L/55 GAL GEARED DRIVE
- IEC71 or NEMA 56C motor flange mount
- Inverter driven or fixed speed
- Twin paddle
- Shaft 800 mm (31.5″)
- 200 mm (7.87″) diameter
- Single or double coiled hose 8 mm (1/8″)
- Single or double flexible hose conduit
- Cable carrier
- High and low mounting points
- Blank or pre-drilled for a variety of equipment mounting options
- 25 L/5 gal or 205 L/55 gal lid sizes
- Lockable inspection hatch
- Reinforced for the weight of heavy equipment
- Available fitted with 1/4″, 3/8″ or 1″ suction tubes
- Option for 1/2″ return tube through lid
