Resource Library
DX 200-3 Diaphragm Pump Manual – 77-3220
- DX 200-3 Diaphragm Pump Manual - 77-3220 [ English ]
77-3220
DX200-3 3:1
Pump Packages
DX200-3SXX-WX Wall
DX200-3SXX-CX Cart
EN
ADDITIONAL RESOURCES
For additional information or copies of your service manual, please visit us online at:
binks.com/en/library
Or use this QR code with your mobile device:
XXXXXXXX
Insert
QR
code
Obey local or municipal regulations for product recycling and disposal.
IMPORTANT! DO NOT DESTROY
It is the Customer's responsibility to have all operators and service personnel read and
understand this manual.
Contact your local Binks representative for additional copies of this manual.
READ ALL INSTRUCTIONS BEFORE OPERATING THIS PRODUCT
77-3220 R2 (05/2025) 2/12 www.binks.com
EN
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
by complying with the following statutory documents and harmonised standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
EN 12621:2006+2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN ISO 80079-36:2016 Explosive Atmospheres- Part 36:Non Electrical equipment for explosive atmospheres-Basic methods
and requirements.
EN ISO 80079-37:2016 Explosive Atmospheres- Part 37: Non Electrical equipment for explosive atmospheres - protection by
methods c, b and k.
EN 1127-1:2019 Explosive atmospheres - Explosion prevention - Basic concepts
Providing all conditions of safe use / installation stated within the product manuals have been complied with and also installed in accordance
with any applicable local codes of practice.
Executive President: Engineering and
Operations, Shoreview, MN, 55126. USA
President @. Binks France SAS
5 Place Pierre Semard, 94130 Nogent sur Marne , Paris, France
EU Declaration of Conformity
This Declaration of Conformity / Incorporation is issued under the sole responsibility of the
manufacturer:
22/04/25
This Declaration of Conformity / Incorporation is issued
under the sole responsibility of the manufacturer:
Binks U.K. Limited,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Representative authorised to compile the technical file
F. A. Sutter
Product Description / Object of Declaration: Diaphragm Pumps - DX70, DX200, DX200-3 Bare pump and
packages
This Product is designed for use with: Solvent & Waterbased Materials
Suitable for use in hazardous area: Zone 1/Zone 2
Protection Level: II 2 G Ex h IIB T4 Gb
Notified body details and role: Element Materials Technology Rotterdam B.V. (2812)
Lodging of ATEX Technical file
Signed for and on behalf of Binks
U.K. Ltd:
Document Part No.
.
77-3220 R2 (05/2025) 3/12 www.binks.com
EN
Element Materials Technology Warwick Ltd. UK. (0891)
Supply of Machinery (Safety) Regulations 2008
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016
by complying with the following statutory documents and designated standards:
BS EN ISO 12100:2010 Safety of Machinery - General Principles for Design
BS EN 12621:2006+2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
BS EN ISO 80079-36:2016 Explosive Atmospheres- Part 36:Non Electrical equipment for explosive atmospheres-Basic
methods and requirements.
BS EN ISO 80079-37:2016 Explosive Atmospheres- Part 37: Non Electrical equipment for explosive atmospheres - protection
by methods c, b and k.
BS EN 1127-1:2019 Explosive atmospheres - Explosion prevention - Basic concepts
Lodging of UKEX Technical file
This Declaration of Conformity / Incorporation is issued
under the sole responsibility of the manufacturer:
Binks U.K. Limited,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Providing all conditions of safe use / installation stated within the product manuals have been complied with and also installed in accordance
with any applicable local codes of practice.
F. A. Sutter
22/04/25
Signed for and on behalf of Binks
U.K. Ltd:
Document Part No.
.
This Declaration of Conformity / Incorporation is issued under the sole responsibility of the
manufacturer:
Executive President: Engineering and
Operations, Shoreview, MN, 55126. USA
Product Description / Object of Declaration:
UKCA Declaration of Conformity
This Product is designed for use with: Solvent & Waterbased Materials
Protection Level: II 2 G Ex h IIB T4 Gb
Approved body details and role:
Diaphragm Pumps - DX70, DX200, DX200-3 Bare pump and
packages
Suitable for use in hazardous area: Zone 1/Zone 2
77-3220 R2 (05/2025) 4/12 www.binks.com
EN
WEAR SAFETY GLASSES. Failure to wear safety glasses with side
shields could result in serious eye injury or blindness.
Read the following warnings before using this equipment.
READ THE MANUAL. Before operating finishing equipment, read and
understand all safety, operation and maintenance information
provided in the operation manual.
AUTOMATIC EQUIPMENT. Automatic
equipment may start suddenly without
warning.
PRESSURE RELIEF PROCEDURE.
Always follow the pressure relief
procedure in the equipment
instruction manual.
OPERATOR TRAINING. All personnel
must be trained before operating
finishing equipment.
INSPECT THE EQUIPMENT DAILY. Inspect the equipment for worn
or broken parts on a daily basis. Do not operate the equipment if
you are uncertain about its condition.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE
OPERATOR OF THE EQUIPMENT.
PROJECTILE HAZARD. You may be
injured by venting liquids or gases
that are released under pressure, or
flying debris.
STATIC CHARGE. Fluid may develop a static charge that must be
dissipated through proper grounding of the equipment, objects to be
sprayed and alll other electrically conductive objects in the
dispensing area. Improper grounding or sparks can cause a
hazardous condition and result in fire, explosion or electric shock and
other serious injury.
NEVER MODIFY THE EQUIPMENT. Do
not modify the equipment unless the
manufacturer provides written
approval.
PROP 65 WARNING. WARNING: This product contains chemicals
known to the state of California to cause cancer and birth defects or
other reproductive harm.
PINCH POINT HAZARD. Moving parts
can crush and cut. Pinch points are
any areas where ther are moving
parts.
CAUTION NOTE
Hazards or unsafe practices which could result in
severe personal injury, death or substantial property
damage.
Hazards or unsafe practices which could result in
minor personal injury, product or property
damage
Important installation, operation or maintenance
information.
WARNING
In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as
follows:
DE-ENERGIZE, DE-PRESSURISE, DISCONNECT AND LOCK OUT ALL
POWER SOURCES DURING MAINTENANCE. Failure to de-energize,
disconnect and lock out all power supplies before performing
equipment maintenance could cause serious injury or death.
EQUIPMENT MISUSE HAZARD. Equipment misuse can cause the
equipment to rupture, malfunction or start unexpectedly and result
in serious injury. PACEMAKER WARNING. You are in the
presence of magnetic fields which may
interfere with the operation of certain
pacemakers.HIGH PRESSURE CONSIDERATION. High pressure can cause serious
injury. Relieve all pressure before servicing. Spray from the gun,
hose leaks or ruptured components can inject fluid into your body
and cause extremely serious injury.
KEEP EQUIPMENT GUARDS IN PLACE.
Do not operate the equipment if the
safety devices have been removed.
WARNING
KNOW WHERE AND HOW TO SHUT
OFF THE EQUIPMENT IN CASE OF AN
EMERGENCY.
NOISE LEVELS. The A-weighted sound level of pumping and spray
equipment may exceed 85 dB(A) depending on equipment settings.
Actual noise levels are available on request. It is recommended that
ear protection is worn at all times while equipment is in use.
77-3220 R2 (05/2025) 5/12 www.binks.com
EN
DXK-2309
Air controls
-
DX200-3SM
DX200-3SP
Suction hose
0115-010186 Cart
See figure
-
F2
Non-Regulated bare pump
Part number
DXA-S25-13S-ME15
DVX-352
Cart & Wall Mounted Pumps
Wall bracket
DXA-AC1-200-3
-
Active Surge Chamber Elbow Fitting -13
Active Surge Chamber Air Hose
Active Surge Chamber Connector -15
-16
-
DXK-106
Item
F1
1
Manual Regulated bare pump
Active Surge Chamber bare pump
-
-
-
-
Description
-
14
Active Surge Chamber Connector
1/2'' Male inlet connector kit, with seals
4m Grounding cable -
7
10
6
5
Screw kit
Active Surge Chamber Connector -17
Active Surge Chamber Reservoir -18
Refer to Manual 77-3218
4
2
-
DXK-101 Screw kit
3
DX200-3SN
8
12
0114-011798
DXK-233
Filter assembly
-0110-009103
Seal - pack of 4
Ø10mm Hose
DXA-F6ME100-200-311 F3
77-3220 R2 (05/2025) 6/12 www.binks.com
EN
Cart & Wall Mounted Pumps
77-3220 R2 (05/2025) 7/12 www.binks.com
EN
F1
F2
Part number Description
3
180584
Item
DVX-246
0115-010697
Suction hose
Suction Tube
DVX-353
4
Nipple
0115-010704 Strainer 1300µm/15 mesh6
DVX-354
DXA-AC1-200-3
DXA-S25-S13-ME15
5
Reference figures
2
1 Nipple
Regulator
77-3220 R2 (05/2025) 8/12 www.binks.com
EN
F3
3
2 DVX-360
Hose Nipple
4 DVX-355 Nipple
5 DVX-357
Filter feed hose
DXA-F6ME100-200-3
Item
Filter assembly
Part number Description
Reference figures
107925
1 DVX-358 Nipple
77-3220 R2 (05/2025) 9/12 www.binks.com
EN
S N 1 - W F
S -
M
P
1 C
W
N
Cart
1/2'' Female Connector
Mounting Type
OptionsPump Body Material
Stainless Steel
Air Regulators
1 Regulator
DX200-3
Wall
Manual Fluid Regulator
No Option
Outlet type
Pulsation Chamber
F Filter
Package - Part numbers
77-3220 R2 (05/2025) 10/12 www.binks.com
EN
This product is covered by Binks materials and workmanship limited warranty.
The use of any parts or accessories, from a source other than Binks, will void all
warranties. Failure to reasonably follow any maintenance guidance provided, may
invalidate any warranty.
For specific warranty information please contact Binks.
For technical assistance or to locate an authorised distributor, contact one of our
international sales and customer support locations below.
REGION BINKS CONTACT
Americas Tel: 1-888-992-4657
Europe, Africa, Middle East Tel: +44 (0)1202 571 111
WARRANTY POLICY
WARRANTY PAGE
India marketingroa@binks.com
China Tel: +8621-3373 0108
Korea Tel: +82313663303
Japan Tel: +81 45 785 6421
Australia Tel: +61 (0) 2 8525 7555
77-3220 R2 (05/2025) 11/12 www.binks.com
EN
© 2025 Binks US, LLC. All rights reserved.
Binks is a global leader in innovative finishing technologies. Binks reserves the right to modify
equipment specifications without prior notice.
Binks®, DeVilbiss®, and Ransburg® are registered trademarks of Binks US, LLC.
77-3220 R2 (05/2025) 12/12 www.binks.com
