- RMA-670 Sales Literature 05-320-01 [ English ]
Fast, consistent
application
RMA-670
Indirect Charge Robot Mounted
Rotary Atomizer
The RMA-600 Series is Ransburg’s next generation of automatic
robot mounted electrostatic rotary atomizers developed with longer-
lasting components to extend use in high production environments.
Improved spray pattern control allows for cleaner operation and
reduces cleaning frequency allowing for greater uptime and reduced
maintenance.
The RMA-670 is designed for the application of waterborne coatings
utilizing an indirect charging method. The removable charging ring
creates an ionized field around the perimeter of the spray pattern,
indirectly charging the atomized coating particles. This method
of electrostatic charging allows for fluid supply from a traditional
grounded, fluid delivery system. The 670 applicators can be equipped
with a 65 or 81mm cup based on application process needs.
RMA-670 Robot Atomizer
A powerful solution can start with a simple conversation
We want to help build the best solution to your application challenges. Learn more about what
we can offer by reaching out to the office nearest you.
For more information,
visit binks.com. ©2025 Binks.
Models and specifications subject to
change without notice. All rights reserved.
Form No. 05-500-01
Americas 1.800.992.4657 marketing@binks.com
EMEA 44.0.120 257.1111 marketing-eu@binks.com
China 86.21.33730108 mkt_cn@binks.com
Japan Sales Office 81.45.785.6421 jp-rans-tokyosales@binks.com
Japan Binks/DeV 81.45.785.6421 jp-binks-devi@binks.com
India/SE Asia 44.0.120 257.1111 marketing-roa@binks.com
With the next generation 600 series applicators, the
engineering team focused on improving applicator
cleanliness and set out to eliminate ghost patterns.
Ghost patterns are formed when atomized particles
escape the desired forward spray pattern. These stray
particles can be a major source of contamination on
the applicator and within the spray environment. The
engineering efforts have resulted in our new dual
shape air technology that encapsulates the atomized
particles into a well-defined, focused spray pattern,
virtually eliminating the ability for atomized particles to
stray. This allows our customers to experience cleaner
applicators throughout production shifts and increased
coating thickness on the parts indicating higher transfer
efficiency.
Power Supply Type: MicroPak 2e
Charging Method: Indirect, Internal Cascade
Output Voltage: 30-70 kV Variable (70 kV Max.)
Output Current: 1000 µA Max.
Turbine Speed Control: MicroPak 2e
Weight Atomizer Only: 18.4 lbs. (8.43 Kg)
Turbine Type: Air Bearing Impulse Drive
Turbine Air Supply: Variable
Bell Cup/Turbine Speed 65mm: 20,000 - 100,000 rpm
(Min/Max): 81mm: 20,000 - 55,000 rpm
Tubing Bundle Max. Rotation: 450° in either direction
Bearing Air Supply 90 psig (±10 psi)
at the Applicator: (621 kPa ±69 kPa) 2.9 SCFM (82 slpm)
Brake Air Supply: 60-100 psig (414-689 kPa) Nominal
Maximum Fluid Pressure Supply:
Paint/Solvent: 200 psi (1379 kPa)
Cup Wash Solvent: 150 psi (1035 kPa)
Fluid Flow Rate: 25-1000 cc/min.
(dependent on bell cup size,
speed and flow rates)
Specifications and ratings based on testing at sea level standard conditions.
Tubing Bundle Max. 450° Rotation in either Direction.
Note: An Air Heater is recommended for the turbine air supply.
SPECIFICATIONS
ELECTRICAL
MECHANICAL
FEATURES
• Optimized Dual-Shaping Air
• Larger Range of Spray Patterns
• Improved Cleanliness
• Increased Transfer Efficiency
Increased Productivity
• New fluid nozzle design reduces solvent usage and
cleaning time
• Quick disconnect tubing bundle allows applicator to
be removed/ replaced in less than two minutes
More Robust Components
• Longer life turbine
• New single piece splash plate design ensure correct
installation every time
• Redesigned tubing bundle allows LV and FO cable
replacement with removing from robot wrist
