Resource Library
RMA-660 Sales Literature 05-319-01
- RMA-660 Sales Literature 05-319-01 [ English ]
Mounted Rotary Atomizer
Best finish quality
Fast, consistent
application
High transfer
efficiency
RMA-660
The RMA-600 Series is Ransburg’s next generation of automatic
robot mounted electrostatic rotary atomizers developed with longer-
lasting components to extend use in high production environments.
Improved spray pattern control allows for cleaner operation and
reduces cleaning frequency allowing for greater uptime and reduced
maintenance.
The RMA-660 is designed for the application of solvent-borne coatings
utilizing a direct charging method. An integrated cascade generates a
high voltage charge that is directly transferred to the coating material
as it is atomized. This method of electrostatic charging allows for
optimal transfer efficiency. The 660 applicators can be equipped with a
30, 65, or 81mm bell cup based on application process needs. For non-
electrostatic applications, the RMA 661 is available.
With the next generation 600 series applicators, the Binks engineering
team focused on improving applicator cleanliness and set out to
eliminate ghost patterns. Ghost patterns are formed when atomized
particles escape the desired forward spray pattern. These stray
particles can be a major source of contamination on the applicator
and within the spray environment.
Direct Charge Robot Mounted Rotary Atomizer
The engineering efforts have resulted in our new dual shape
air technology that encapsulates the atomized particles into
a well-defined, focused spray pattern, virtually eliminating the
ability for atomized particles to stray. This allows our customers
to experience cleaner applicators throughout production shifts
and increased coating thickness on the parts indicating higher
transfer efficiency.
ELECTRICAL
MECHANICAL
Features
• Optimized Dual-Shaping Air
• Larger Range of Spray Patterns
• Improved Cleanliness
• Increased Transfer Efficiency
Increased Productivity
• Dual Purge option reduces color change time
• New fluid nozzle design reduces solvent usage and
cleaning time
• Quick disconnect tubing bundle allows applicator to be
removed/ replaced in less than two minutes
More Robust Components
• Longer life turbine
• New single piece splash plate design ensure correct
installation every time
• Redesigned tubing bundle allows LV and FO cable
replacement with removing from robot wrist
Power Supply Type: MicroPak 2e
Charging Method: Direct, Internal Cascade
Output Voltage: 30-100 kV Variable (100 kV Max.)
Output Current: 125 µA Max.
Turbine Speed Control: MicroPak 2e
Weight Atomizer Only: 12.77 lbs. (5.8 Kg)
Turbine Type: Air Bearing Impulse Drive
Turbine Air Supply: Variable
Bell Cup/Turbine Speed 30mm: 20,000 - 100,000 rpm
(Min/Max): 65mm: 20,000 - 100,000 rpm
81mm: 20,000 - 55,000 rpm
Tubing Bundle Max. Rotation: 450° in either direction
Bearing Air Supply at 90 psig (±10 psi) Nominal
the Applicator: (621 kPa ±69 kPa) 2.9 SCFM (82 slpm)
Brake Air Supply: 60-100 psig (414-689 kPa) Nominal
Maximum Fluid Pressure Supply:
Paint/Solvent: 200 psi (1379 kPa)
Cup Wash Solvent: 150 psi (1035 kPa)
Fluid Flow Rate: 25-1000 cc/min.
(dependent on bell cup size, speed
and flow rates)
For more information,
visit binks.com.
Learn more about what we can
offer by reaching out to your
local representative.
A powerful solution
can start with a
simple conversation
ROA 44.0.120 257.1111 | marketing-roa@binks.com
Americas 1.800.992.4657 | marketing@binks.com
EMEA 44.0.120 257.1111 | marketing-eu@binks.com
China 86.21.33730108 | mkt_cn@binks.com
Japan Sales Office 81.45.785.6421 | jp-rans-tokyosales@binks.com
Japan Binks/DeV 81.45.785.6421 | jp-binks-devi@binks.com
©2025 Binks. Models and specifications subject to change without notice.
All rights reserved. Form No. 05-440-01
jlietzke
Cross-Out
