The TurboDisk rotary atomizer offers significantly finer atomization due to its capacity to achieve much higher rotational speeds and transfer efficiencies. By integrating the TurboDisk into your production process, you can enhance transfer efficiency while reducing VOC emissions. Proven quality improvements have been observed across a wide range of coating materials, including waterborne and high-solids options. This applicator is ideal for both small and large applications, such as aluminum extrusions, automotive underbody components, and smaller racked products.
Best finish quality
Consistent application
High transfer efficiency
TurboDiskTM
High speed applicator with superior atomization capabilities to handle even the most difficult coatings.
TURBODISK™ THE HIGH SPEED APPLICATOR WITH SUPERIOR ATOMIZATION CAPABILITIES TO HANDLE EVEN THE MOST DIFFICULT COATINGS
With the introduction of TurboDisk, Ransburg has set a new standard in providing electrostatic applicator solutions to the coatings industry. Integrating the TurboDisk produces sustaintially finer atomization due to its ability to generate much higher rotational speeds and transfer efficiencies. Proven quality improvements are realized with the widest range of coating materials including waterbornes and high solids.
Serrated Edge Conical Disk
Dual Feed Fluid System
Bold, High Visibility Color Coding
Stainless Steel Construction
Easy Maintenance Design
TurboDisk Rotary Atomizer
A powerful solution can start with a simple conversation We want to help build the best solution to your application challenges. Learn more about what we can offer by reaching out to the office nearest you.
Models and specifications subject to change without notice. All rights reserved. Form No. 05-545-01
Americas 1.800.992.4657 marketing@binks.com EMEA 44.0.120 257.1111 marketing-eu@binks.com China 86.21.33730108 mkt_cn@binks.com Japan Sales Office 81.45.785.6421 jp-rans-tokyosales@binks.com Japan Binks/DeV 81.45.785.6421 jp-binks-devi@binks.com India/SE Asia 44.0.120 257.1111 marketing-roa@binks.com
Serrated Edge Conical Disk: Turbodisk’s proprietary edge design provides superior atomization quality even at minimal rotational speeds
Easy Access Fairing Design: makes external surface cleaning a labor-saving snap
Dual Feed Fluid System: allows for higher fluid delivery rates and increased productivity
Legendary Reliability: Turbodisk incorporates proven, long-term turbine motor reliability
High Flow Regulators/Fluid Valves: allows for simultaneous paint push out while solvent washes the feed tube and disk
Stainless Steel/Teflon Construction: majority of component assemblies are virtually impervious to fluids
Enhanced Readouts: optional speed readout (control) incorporates reliable magnetic pickup for fiber-optic transmission of rotational speed data
Easy Maintenance Design: upper and lower assemblies are easily fitted and latched for efficient and economical maintenance procedures
MECHANICAL
SPECIFICATIONS
ELECTRICAL - POWER SUPPLY
Turbine Speed Variable to 40,000 rpm max. (6 conical disk) (152 mm) Turbine Type Ball Bearing Weight 57 lbs. (approximately) (26 kg) Length 36 in. (914 mm) Diameter 13.25 in. (336 mm) Turbine Air At max. speed (40k rpm), requires 103.1 psi and £1.1 scfm, unloaded Single Fluid Flow Range Waterborne To 1200 cc/min. Solvent Base To 1500 cc/min. High Solids To 1100 cc/min. (80%+) Air Inlet Trigger/Dump 70-100 psi
Type MicroPak™ Industrial or Voltage Master™2 Charbing Method Direct Input Voltage 0-100 kV Turbine Speed Control PulseTrack™2 or Monitor (optional)