- BINKS - AG364 - サービスマニュアル - SB-E-2-646 - 英語 [ 英語 ]
Airless Automatic Manifold Gun.
II 2 G X T6
IMPORTANT! DO NOT DESTROY
It is the Customer's responsibility to have all operators and service personnel read and understand
this manual.
Contact your local Carlisle Fluid Technologies representative for additional copies of this manual.
READ ALL INSTRUCTIONS BEFORE OPERATING THIS PRODUCT.
SERVICE MANUAL
AG360 Series: AG364
SB-E-2-646 R2.0 (06/2025) www.binks.com
EN
P2 = Cylinder Air Pressure
P1 = Max Fluid Input Pressure
P2 = Cylinder Inlet
P1 = Fluid Inlet Size
SPECIFICATIONS
Anodised Aluminium
WEIGHT WITH MANIFOLD
1/4 NPS
1/8 NPS
110 x 62 x 44
SCREW TYPE MANIFOLD CONNECTIONS
820g
DIMENSIONS WITH MANIFOLD
Stainless Steel
Tungsten Carbide
Seals and O-Rings
Gun Body Material
Fluid Needle and Seat Construction
Max Ambient Operating Temperature 40°C Nominal [104°F]
MATERIALS OF CONSTRUCTION
Gun Head and Fluid Passageways Stainless Steel
275 bar [4000 psi]
4 - 10 bar [58 psi - 145 psi]
Tip Holder Material
Anodised Aluminium
HDPE, FEPM
L x H x W mm
WEIGHT
FUNCTIONAL DESCRIPTION
FLUID AND AIR INLET PRESSURES
The AG364 Airless gun is designed to be fast change-over, modular construction applicator for spray
finishing on machines and fixed mountings.
Intended for most types of general industrial coatings and fine finishing operations, the gun features
a stainless steel head suitable for both water based and solvent based applications.
It is mounted on a screw attached low profile stainless steel manifold which can remain in position on
the machine while the gun is removed for maintenance or cleaning operations.
The gun is designed as a flexible solution for the modern coating applicator with multiple accessories
available to further optimise the process.
ENVIRONMENTAL
SB-E-2-646 R2.0 2/28 www.binks.com
EN
Product Description / Object of Declaration: AG364
This Product is designed for use with: Solvent & Waterbased Materials
Suitable for use in hazardous area: Zone 1/Zone 2
Protection Level: II 2 G X T6/Ex h II Gb X
Notified body details and role: Element Materials Technology Rotterdam B.V. (2812)
Lodging of ATEX Technical file
This Declaration of Conformity / Incorporation is issued
under the sole responsibility of the manufacturer:
Binks U.K. Limited,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Representative authorised to compile the technical file President @. Binks France SAS
5 Place Pierre Semard, 94130 Nogent sur Marne , Paris, France
EU Declaration of Conformity
This Declaration of Conformity / Incorporation is issued under the sole responsibility of the
manufacturer:
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
by complying with the following statutory documents and harmonised standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
BS EN 1953:2013 Atomizing and spraying equipment for coating materials - Safety requirements
EN ISO 80079-36:2016 Explosive Atmospheres- Part 36:Non Electrical equipment for explosive atmospheres-Basic methods
and requirements.
EN ISO 80079-37:2016 Explosive Atmospheres- Part 37: Non Electrical equipment for explosive atmospheres - protection by
methods c, b and k.
EN 1127-1:2019 Explosive atmospheres - Explosion prevention - Basic concepts
Providing all conditions of safe use / installation stated within the product manuals have been complied with and also installed in accordance
with any applicable local codes of practice.
Signed for and on behalf of
Binks U.K. Ltd: Executive President: Engineering and
Operations, Shoreview, MN, 55126. USA
F. A. Sutter
Document Part No.
. 09/04/25
SB-E-2-646 R2.0 3/28 www.binks.com
EN
Product Description / Object of Declaration: AG364
This Product is designed for use with: Solvent & Waterbased Materials
Suitable for use in hazardous area: Zone 1/Zone 2
Protection Level: II 2 G X T6/Ex h II Gb X
Approved body details and role: Element Materials Technology Warwick Ltd. UK. (0891)
Lodging of UKEX Technical file
This Declaration of Conformity / Incorporation is issued
under the sole responsibility of the manufacturer:
Binks U.K. Limited,
Ringwood Road,
Bournemouth, BH11 9LH. UK
UKCA Declaration of Conformity
This Declaration of Conformity / Incorporation is issued under the sole responsibility of the
manufacturer:
Supply of Machinery (Safety) Regulations 2008
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016
by complying with the following statutory documents and designated standards:
BS EN ISO 12100:2010 Safety of Machinery - General Principles for Design
BS EN 1953:2013 Atomizing and spraying equipment for coating materials - Safety requirements
BS EN ISO 80079-36:2016 Explosive Atmospheres- Part 36:Non Electrical equipment for explosive atmospheres-Basic
methods and requirements.
BS EN ISO 80079-37:2016 Explosive Atmospheres- Part 37: Non Electrical equipment for explosive atmospheres - protection
by methods c, b and k.
BS EN 1127-1:2019 Explosive atmospheres - Explosion prevention - Basic concepts
Providing all conditions of safe use / installation stated within the product manuals have been complied with and also installed in accordance
with any applicable local codes of practice.
Signed for and on behalf of Binks
U.K. Ltd:
Executive President: Engineering and
Operations, Shoreview, MN, 55126. USA
F. A. Sutter
Document Part No.
. 09/04/2025
SB-E-2-646 R2.0 4/28 www.binks.com
EN
PRESSURE RELIEF PROCEDURE. Always follow the pressure
relief procedure in the equipment instruction manual.
KNOW WHERE AND HOW TO SHUT OFF THE EQUIPMENT
IN CASE OF AN EMERGENCY.
HIGH PRESSURE CONSIDERATION. High pressure can cause serious
injury. Relieve all pressure before servicing. Spray from the gun, hose leaks or
ruptured components can inject fluid into your body and cause extremely
serious injury.
OPERATOR TRAINING. All personnel must be trained before
operating finishing equipment.
PROJECTILE HAZARD. You may be injured by venting liquids or
gases that are released under pressure, or flying debris.
NOISE LEVELS. The A-weighted sound level of pumping and spray equipment
may exceed 85 dB(A) depending on equipment settings. Actual noise levels
are available on request. It is recommended that ear protection is worn at all
times while equipment is in use.
WARNING
Read the following warnings before using this equipment.
INSPECT THE EQUIPMENT DAILY. Inspect the equipment for
worn or broken parts on a daily basis. Do not operate the
equipment if you are uncertain about its condition.
Hazards or unsafe practices which could result in
severe personal injury, death or substantial
property damage.
Hazards or unsafe practices which could result in
minor personal injury, product or property
damage.
SOLVENTS AND COATING MATERIALS. Can be highly flammable or
combustible when sprayed. Always refer to the coating material supplier's
instructions and safety sheets before using this equipment.
READ THE MANUAL. Before operating finishing equipment, read and
understand all safety, operation and maintenance information provided in the
operation manual. Users must comply with all local and national codes of
practice and insurance company requirements governing ventilation, fire
precautions, operation and house-keeping of working areas.
Important installation, operation or maintenance
information.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE OPERATOR OF THE EQUIPMENT.
EQUIPMENT MISUSE HAZARD. Equipment misuse can cause
the equipment to rupture, malfunction or start unexpectedly and
result in serious injury.
TOXIC VAPOURS. When sprayed, certain materials may be poisonous, create
irritation, or are otherwise harmful to health. Always read all labels, safety
sheets and follow any recommendations for the material before spraying. If in
doubt contact your material supplier.
NEVER MODIFY THE EQUIPMENT. Do not modify the
equipment unless the manufacturer provides written approval.
LOCK OUT / TAG-OUT. Failure to de-energise, disconnect, lock out and tag-
out all power sources before performing equipment maintenance could cause
serious injury or death.
STATIC CHARGE. Fluid may develop a static charge that must be dissipated
through proper grounding of the equipment, objects to be sprayed and all other
electrically conductive objects in the dispensing area. Improper grounding or
sparks can cause a hazardous condition and result in fire, explosion or elecrtic
shock and other serious injury.
WEAR RESPIRATOR. The use of respiratory protective
equipment is recommended at all times. The type of equipment
must be compatible with the material being sprayed.
In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasise important safety information as
follows:
WARNING CAUTION NOTE
FIRE AND EXPLOSION HAZARD. Never use 1,1,1-Trichloroethane,
Methylene Chloride, other Halogenated Hydrocarbon solvents or fluids
containing such solvents in equipment with aluminium wetted parts. Such use
could result in a serious chemical reaction, with the posibility of explosion.
Consult your fluid suppliers to ensure that the fluids being used are compatible
with aluminium parts.
GLOVES. Must be worn when spraying or cleaning the
equipment.
WEAR SAFETY GLASSES. Failure to wear safety glasses with
side shields could result in serious eye injury or blindness.
SB-E-2-646 R2.0 5/28 www.binks.com
EN
AG364 PART NUMBER
FOR MACHINE MOUNTING ADAPTOR OPTIONS, GUN DIMENSIONS AND
FIXING LOCATIONS - SEE PAGES 22, 23 & 24
Spray gun with non-recirculation manifoldAG364-0000-S
Spray gun with recirculation manifoldAG364-0000-T
DESCRIPTIONPART No.
SB-E-2-646 R2.0 6/28 www.binks.com
EN
0.009 0.23 10 254 0.039 0.15
0.009 0.23 12 305 0.039 0.15
0.011 0.28 8 203 0.06 0.23
0.011 0.28 10 254 0.06 0.23
0.011 0.28 12 305 0.06 0.23
0.011 0.28 14 356 0.06 0.23
0.013 0.33 10 254 0.09 0.34
0.013 0.33 12 305 0.09 0.34
0.013 0.33 14 356 0.09 0.34
0.013 0.33 16 406 0.09 0.34
0.015 0.38 10 254 0.12 0.45
0.015 0.38 12 305 0.12 0.45
0.015 0.38 14 356 0.12 0.45
0.015 0.38 16 406 0.12 0.45
0.015 0.38 18 457 0.12 0.45
0.017 0.43 10 254 0.16 0.61
0.017 0.43 12 305 0.16 0.61
0.017 0.43 14 356 0.16 0.61
0.017 0.43 16 406 0.16 0.61
0.017 0.43 18 457 0.16 0.61
REMOVABLE SEAL FINE FINISH TIP SELECTION CHART
RS-1313-F
RS-1311-F
FLOW
[WATER @ 500
psi/35 bar]
* FAN LENGTH BASED ON 1000 psi [70 bar] WATER, SPRAYED AT 12 [300mm] FROM SURFACE.
ACTUAL RESULTS MAY VARY, DEPENDING ON MATERIAL VISCOSITY
RS-1713-F
RS-1711-F
REPLACABLE SEAL
INCH MM
RS-1309-F
RS-5860-K5
RS-5861-K5
RS-0911-F
RS-0909-F
RS-1315-F
BEFORE ORDERING SPARE SEALS, CHECK FOR THE CORRECT PART NUMBER IN THE TABLE ABOVE
RS-1111-F
RS-1109-F
INCH US GPM L/MIN
RS-5858-K5
FAN LENGTH*ORIFICE
PART No.
RS-1509-F
RS-1115-F
RS-1113-F
RS-5859-K5
RS-1717-F
RS-1715-F
RS-1513-F
RS-1511-F
MM
RS-5862-K5
RS-1515-F
RS-1709-F
RS-1517-F
SB-E-2-646 R2.0 7/28 www.binks.com
EN
RS-0702 0.007 0.18 2 51 0.028 0.11 RS-1706 0.017 0.43 6 152 0.16 0.61
RS-0704 0.007 0.18 4 102 0.028 0.11 RS-1708 0.017 0.43 8 203 0.16 0.61
RS-0706 0.007 0.18 6 152 0.028 0.11 RS-1710 0.017 0.43 10 254 0.16 0.61
RS-0708 0.007 0.18 8 203 0.028 0.11 RS-1712 0.017 0.43 12 305 0.16 0.61
RS-0902 0.009 0.23 2 51 0.039 0.15 RS-1714 0.017 0.43 14 356 0.16 0.61
RS-0904 0.009 0.23 4 102 0.039 0.15 RS-1716 0.017 0.43 16 406 0.16 0.61
RS-0906 0.009 0.23 6 152 0.039 0.15 RS-1718 0.017 0.43 18 457 0.16 0.61
RS-0908 0.009 0.23 8 203 0.039 0.15 RS-1906 0.019 0.48 6 152 0.19 0.72
RS-0910 0.009 0.23 10 254 0.039 0.15 RS-1908 0.019 0.48 8 203 0.19 0.72
RS-0912 0.009 0.23 12 305 0.039 0.15 RS-1910 0.019 0.48 10 254 0.19 0.72
RS-1104 0.011 0.28 4 102 0.06 0.23 RS-1912 0.019 0.48 12 305 0.19 0.72
RS-1106 0.011 0.28 6 152 0.06 0.23 RS-1914 0.019 0.48 14 356 0.19 0.72
RS-1108 0.011 0.28 8 203 0.06 0.23 RS-1916 0.019 0.48 16 406 0.19 0.72
RS-1110 0.011 0.28 10 254 0.06 0.23 RS-1918 0.019 0.48 18 457 0.19 0.72
RS-1112 0.011 0.28 12 305 0.06 0.23 RS-2110 0.021 0.53 10 254 0.24 0.91
RS-1114 0.011 0.28 14 356 0.06 0.23 RS-2112 0.021 0.53 12 305 0.24 0.91
RS-1304 0.013 0.33 4 102 0.09 0.34 RS-2114 0.021 0.53 14 356 0.24 0.91
RS-1306 0.013 0.33 6 152 0.09 0.34 RS-2116 0.021 0.53 16 406 0.24 0.91
RS-1308 0.013 0.33 8 203 0.09 0.34 RS-2118 0.021 0.53 18 457 0.24 0.91
RS-1310 0.013 0.33 10 254 0.09 0.34 RS-2410 0.024 0.61 10 254 0.31 1.17
RS-1312 0.013 0.33 12 305 0.09 0.34 RS-2412 0.024 0.61 12 305 0.31 1.17
RS-1314 0.013 0.33 14 356 0.09 0.34 RS-2414 0.024 0.61 14 356 0.31 1.17
RS-1316 0.013 0.33 16 406 0.09 0.34 RS-2416 0.024 0.61 16 406 0.31 1.17
RS-1506 0.015 0.38 6 152 0.12 0.45 RS-2418 0.024 0.61 18 457 0.31 1.17
RS-1508 0.015 0.38 8 203 0.12 0.45 RS-2710 0.027 0.69 10 254 0.385 1.46
RS-1510 0.015 0.38 10 254 0.12 0.45 RS-2712 0.027 0.69 12 305 0.385 1.46
RS-1512 0.015 0.38 12 305 0.12 0.45 RS-2714 0.027 0.69 14 356 0.385 1.46
RS-1514 0.015 0.38 14 356 0.12 0.45 RS-2716 0.027 0.69 16 406 0.385 1.46
RS-1516 0.015 0.38 16 406 0.12 0.45 RS-2718 0.027 0.69 18 457 0.385 1.46
RS-1518 0.015 0.38 18 457 0.12 0.45
REMOVABLE SEAL STANDARD TIP SELECTION CHART
PART
No.
MMINCH MM
FLOW
[WATER @ 500
psi/35 bar]
FAN LENGTH*ORIFICE
PART
No.
FLOW
[WATER @ 500
psi/35 bar]
FAN LENGTH*ORIFICE
L/MINUS GPMUS GPM L/MININCH
* X369FAN LENGTH BASED ON 1000 psi [70 bar] WATER, SPRAYED AT 12 [300mm] FROM SURFACE.
REPLACEMENT TIP SEALS FOR STANDARD TIPS: RS-5000-K5 MULTI-PACK OF 5 PIECES / RS-5000-K10 MULTI-PACK OF 10 PIECES
INCHMMINCHMM
SB-E-2-646 R2.0 8/28 www.binks.com
EN
1
2
3
4
5
P2
The spray gun must be earthed to dissipate any electrostatic charges which may be created by fluid
or air flows.
This can be achieved through the spray gun mounting, or conductive air/fluid hoses.
Electrical bond from the spray gun to earth should be checked and a resistance of less than 10⁶ Ohms
is required.
TYPICAL CONNECTION SCHEMATIC
Compressed air take-off
Shut-off valve
3/2 solenoid valve, normally closed
Quick exhaust valve & silencer
CYL - 1/8 NPS(F)
WARNING
Air filter
1
2
3
4
5
P2
SB-E-2-646 R2.0 9/28 www.binks.com
EN
1
2
3
4
5
P1
AG364-XXXX-S
Fluid reservoir
FRONT VIEW
Fluid filter
Fluid supply
FRONT VIEW
Fluid - 1/4 NPS
NOTE
Shut-off valve
Fluid restrictor valve
Protective coatings have been used for storage protection.
Flush the equipment fluid passageways with appropriate solvent before use.
TYPICAL FLUID CONNECTION SCHEMATIC
AG364-XXXX-T
P1 P1P1
1
2
3 4
5
SB-E-2-646 R2.0 10/28 www.binks.com
EN
SPRAY GUN AND MANIFOLD INSTALLATION
SB-E-2-646 R2.0 11/28 www.binks.com
EN
EXPLODED VIEW
SB-E-2-646 R2.0 12/28 www.binks.com
EN
1 #
2 #
3
5 #
6
7
8 * #
9 *
10
11 *
12 #
13 * #
14
15 #
16 #
17
18
20 #
21 #
22 *
23 #
24 *
25
26
27
28
SN-71X-K2
SPA-13
SPA-54 VENT CAP
1
INDEX PLATE (KIT OF 10)
S-14190-K4 TORX SCREW (KIT OF 4)
1
RETAINING RING WITH SEALS54-6029-K 1
SPA-45X-K2
1
1
1
1
1
O RING (KIT OF 2)
PISTON
O RING (KIT OF 2)
1FLUID TIPSEE TABLE
-
1
END CAP
SPA-428-K
FLUID NEEDLE
SPA-77
1
NEEDLE PACKING
O RING (KIT OF 4)
BODY
SPA-76-K
1
1
1
SCREW MANIFOLD ASSEMBLY
NEEDLE SPRING
PISTON SPRING
1SPA-191-K
S-28220X-K2
SPA-68-K
S-28219X-K4
SPA-161-K2
1
1
DESCRIPTION
ASSEMBLY
QTY.
REF. PART No.
4
1
SPA-190-K
SPA-70-K10
TIP HOLDER
SPRAYHEAD
SPA-67-BL-K
SPA-52 AIR TUBE
1
54-6031-K
SPA-79
SEAL
O RING (KIT OF 4)
1
RECIRCULATION SCREW MANIFOLD ASSEMBLY
CLAMPING SCREW (KIT OF 2)
O-RING (PART OF SPA-161-K2)
1
1
SPA-428U-K
O RING
1
O RING (KIT OF 4)
HOUSING
O RING (KIT OF 4)
1
1
S-28223X-K4
-
SPA-29X-K4
SPA-96-K4
SPA-46X-K4
19
SERVICE PARTS
KK-4588 SOFT SEAL SERVICE KIT - INCLUDES ITEMS MARKED *
KK-4589 MAJOR OVERHAUL SERVICE KIT - INCLUDES ITEMS MARKED #
1
1
SPA-69-K NEEDLE SEAT ASSY
PARTS LIST
1
SB-E-2-646 R2.0 13/28 www.binks.com
EN
TYPICAL START-UP SEQUENCE
1. Select a nominal gun fluid inlet pressure to start the spray optimisation [eg 500psi/33 bar] by adjusting
pump pressure or fluid regulator output pressure
2. View the spray pattern appearance and increase or decrease fluid pressure to establish the minimum fluid
pressure at which a well shaped spray pattern can be achieved without poor atomisation 'tails' .
3. Test spray products and increase fluid pressure until the required results are achieved.
4. If maximum fluid pressure is reached and more fluid flow is required, then increase tip orifice size and repeat
steps 1-3
5. Remember - To change fluid flow, coating thickness, spray pattern length etc could require modification of
fluid viscosity, tip orifice size, tip pattern angle, pump pressure and gun traverse speed
TYPICAL SETTING
1. There is no air used by this spray gun to influence atomisation and fan pattern size.The fluid pressure and
selection of spray tip controls these spray parameters.
2. Select a suitable spray tip based upon the information contained in the tables on page 11 and 12 and fit it
securely onto the spray gun.
3. There is limited control of fluid flow using pump pressure and tip orifice size.
SB-E-2-646 R2.0 14/28 www.binks.com
EN
KEY - MAINTENANCE SYMBOLS
Petroleum Grease/Jelly
Order for disassembly
(reverse for assembly)
Item Number
SPRAY GUN MAINTENANCE
DISASSEMBLY - NEEDLE SEAT & NEEDLE
#
#
SB-E-2-646 R2.0 15/28 www.binks.com
EN
Install screws to aid piston removal.
By combined use of gun assembly A and item 2, the tip holder and tip can be indexed at 45°
rotational increments.
Item 2 can also be removed and not used, allowing free rotation to any angle.
DISASSEMBLY - TIP HOLDER, NEEDLE SEAT & INDEX PLATE
DISASSEMBLY - PISTON
SB-E-2-646 R2.0 16/28 www.binks.com
EN
DISASSEMBLY - NEEDLE PACKING
SB-E-2-646 R2.0 17/28 www.binks.com
EN
Damaged or missing piston O
ring
Inspect and/or replace
Replace.
Blocked tip. Replace or clean.
Use correct solenoid valve for
CYL air or fit quick exhaust valve
Air pressure to piston is not
being removed
Will not spray.
Gun will not shut off.
CORRECTIONCAUSEFLUID LEAKAGE FAULTS
Remove tip and needle and
thoroughly clean.
Insufficient piston (CYL) air
pressure
Fluid pressure above gun max
working pressure.
Reduce fluid pressure.
Replace.
Needle seat internal surface
scored damaged or worn.
Check air supply and air line
pressure.
Check air supply and air line.
GENERAL FAULTS CAUSE CORRECTION
No cylinder air pressure at gun.
TROUBLESHOOTING MECHANICAL PERFORMANCE
Fluid needle external profile
damaged or worn.Slow fluid leak from needle seat.
Contamination on needle or seat
mating surfaces preventing good
seal.
Thoroughly clean.
Major fluid leak or fluid jetting
from fluid tip or needle seat,
when gun is off.
Contamination on needle or seat
mating surfaces preventing good
seal.
SB-E-2-646 R2.0 18/28 www.binks.com
EN
Air leak between gun and
manifold when gun is triggered.
ASSEMBLY FAULTS
Replace O ring.
Spray gun is loose when
assembled onto manifold.
Clamping screw has not been
tightened.
CORRECTION
CYL Air Tube O ring damaged or
missing.
Fluid leak between gun and
manifold.
CAUSE
Clamping screw has worn.
Tighten or replace as necessary.
CORRECTION
Fluid needle packing worn or
loose.
CAUSE
Replace using clamping screw kit
SPA-161-K2.
FLUID FAULTS
Check pin.
Repair or replace.
Damage to head of Manifold
Location Pin.
Spray Gun does not fit onto
manifold easily before the screw
is tightened.
Spray Gun does not remove
from manifold easily after the
screw is undone.
Damage to head of Manifold
Location Pin.
Check pin.
Repair or replace.
CAUSE
Fluid passageway O ring
damaged or missing.
Replace O ring.
SCREW TYPE MANIFOLD FAULTS
Slow fluid leak from needle
packing, three possible places.
CORRECTION
Tighten screw.
SB-E-2-646 R2.0 19/28 www.binks.com
EN
Thoroughly clean gun head.
Examine spray process to reduce
spray fog.
Gradual build-up of bounce-back
on gun head.
Paint build-up on tip retainer.
Replace or thoroughly clean tip
and cap.
Damaged or partially blocked tip.
CORRECTIONCAUSE
TROUBLESHOOTING SPRAY
PERFORMANCE
Gun spits paint when triggering
on due to paint build-up inside
air cap between spraying
operations.
Replace seat.
Needle seat/needle leakage.
Needle seat not fitted correctly
in gun head.
Coating type promotes build-up. Consult coating supplier.
Damaged or partially blocked tip. Check for damage or blockage.
Tip seat worn in rear of tip.
Needle seat not tight. Tighten.
Tip retainer fills with paint when
triggered.
Tip not seated correctly.
Remove, clean and reinstall tip
into gun head.
Paint build-up on fluid tip.
Tighten.
Check for damage or blockage.
SB-E-2-646 R2.0 20/28 www.binks.com
EN
Tip orifice too big
Change tip.Fluid Viscosity too low
Tip partially blocked Clean or replace.
Viscosity too high Reduce viscosity
Insufficient Fluid Flow
Bleed air from supply line.
Unatomised multiple jets.
CORRECTION
Increase pump pressure
Viscosity too high Reduce viscosity
Air in paint supply line.
Check and tighten pump siphon
hose connections.
Top and bottom 'Tails'
Change to smaller tip
CAUSESPRAYING FAULTS
Intermittent or 'fluttering' spray
fan.
Heavy centre pattern.
Replace.Fluid Tip worn
Partially obstructed fluid passage
or hose.
TROUBLESHOOTING SPRAY PERFORMANCE
Clean or replace.
SB-E-2-646 R2.0 21/28 www.binks.com
EN
Runs and sags.
Too much material.
Reduce tip size or reduce fluid
pressure.
Material too thin.
Apply light coats/reduce fluid
flow.
Gun tilted at an angle.
Check distance.
Fluid flow too low.
Gun too far from surface.
Worn or partially blocked tip
CORRECTIONCAUSESPRAYING FAULTS
Distorted spray pattern shape
Thin, sandy coarse finish drying
before it flows out.
Increase fluid flow by increasing
fluid tip size or supply pressure.
Mount gun at right angle to work.
Clean and inspect, ,
replace if necessary
SB-E-2-646 R2.0 22/28 www.binks.com
EN
Mounting Arm available from
Machine Manufacturer
Hole Diameter = 12.8mm (to take 1/2
diameter bar)
SPA-174-K
Horizontal mounting bar and screws. Vertical mounting bar and scerws
SPA-175-K
MOUNTING ADAPTOR OPTIONS - SCREW TYPE MANIFOLD
SPA-173-K
Mounting block and screws Index adjustment and screws
SPA-176-K
Bar diameter = 12.5mm (to fit into 1/2 Hole)
SB-E-2-646 R2.0 23/28 www.binks.com
EN
FIXING LOCATIONS
SB-E-2-646 R2.0 24/28 www.binks.com
EN
DIMENSIONS
SB-E-2-646 R2.0 25/28 www.binks.com
EN
Tip cleaners (KIT OF 12)DSG-4003
ACCESSORIES
54-1835
PART No. DESCRIPTION
SPA-175-K
72-2341 Housing & filter
Filter element
Filter 1/4 NPS M-F 100 Micron 400 bar.
SPA-115
SPA-116
1/4'' NPT- NPS Elbow 275 bar MWP.
1/4'' NPT - BSP Elbow 275 bar MWP.
SPA-173-K Horizontal mounting bar and screws.
SPA-174-K Vertical mounting bar and scerws
Mounting block and screws
SPA-176-K Index adjustment and screws
SB-E-2-646 R2.0 26/28 www.binks.com
EN
China Tel: +8621-3373 0108
Korea Tel: +82313663303
Japan Tel: +81 45 785 6421
Australia Tel: +61 (0) 2 8525 7555
WARRANTY PAGE
This product is covered by Binks materials and workmanship limited warranty.
The use of any parts or accessories, from a source other than Binks, will void all warranties. Failure to
reasonably follow any maintenance guidance provided, may invalidate any warranty.
For specific warranty information please contact Binks.
For technical assistance or to locate an authorised distributor, contact one of our international sales and
customer support locations below.
REGION BINKS CONTACT
Americas Tel: 1-888-992-4657
Europe, Africa, Middle East Tel: +44 (0)1202 571 111
India marketingroa@binks.com
WARRANTY POLICY
SB-E-2-646 R2.0 27/28 www.binks.com
EN
Binks is a global leader in innovative finishing technologies. Binks reserves the right to modify equipment
specifications without prior notice.
Binks®, DeVilbiss®, and Ransburg® are registered trademarks of Binks US, LLC.
© 2025 Binks US, LLC. All rights reserved.
SB-E-2-646 R2.0 28/28 www.binks.com
