- アドバンス HD マニュアル ガン資料 03-516-01 [ 英語］
- アドバンス HD マニュアル ガン文献 FR [ フランス語 ]。
- アドバンスHDマニュアル・ガン GR [ ドイツ語］
- アドバンスHDマニュアル ガン文献 CZ [ チェコ ]製
- アドバンス HD マニュアル Gun Literature IT [ イタリア語 ]｜ブックライブ(booklive)電子書籍最新情報
- アドバンス HD マニュアル ガン資料 PO [ ポーランド ]製
- アドバンス HD マニュアル Gun Literature RU [ ロシア語 ]｜BookLive!
- アドバンス HD マニュアル・ガン資料 TU [ トルコ語 ]｜ブックライブ「無料立ち読み」一覧
Advance HD
The All
Purpose
Mid-Sized
Spray Gun
Significantly raising the benchmark in spray gun
performance and productivity
Advance HD (high demand) spray
guns are available in Pressure,
Suction and Gravity feed formats
• �Robust, lightweight and work friendly design for
High Demand outputs
• �Contoured handle design greatly reduces RSi
and operator fatigue
• �Balanced air valve design for lighter trigger pull
and improved air flow
• �Stainless steel tips, needles and fluid
passageways as standard
• �CE marked and fully ATEX approved
• �Wide range of air caps provide a superior finish
with the best possible paint savings and
transfer efficiency (compliant or conventional,
depending on spray gun range selected)
• The Advance HD is lightweight with a lighter
trigger action, increased finger room, and
contoured handle design. Advance HD spray
guns are precision built by DeVilbiss using
the best materials and component parts for a
guaranteed, reliable, long and durable working life.
Perfectly balanced, naturally
comfortable
Binks spray guns
have evolved with
our Advance HD
range, engineered
for all industrial
spray finishing
applications.
Advance HD unrivaled high performance
is achieved with new design technology
utilizing high capacity air passages with a
separate balanced air valve to provide an
unrestricted flow of compressed air through
the gun body. This free breathing air
movement enables the precision-engineered
air caps and fluid tips to produce superior
atomization with consistent even distribution
throughout the spray pattern.
Features:
• Heavily anodized for durability
• Wide hook opening 1/2 (12mm)
• Easy adjustments for precise control
• Separate balanced air valve design
Aluminum Alloy Body
• Easier access for operator
• Lighter trigger pull tension
• Reduced trigger travel
• Self-adjusting needle packing assembly
(PTFE)
Increased Finger Space
• Superior fit and feel with reduced
operator fatigue and RSI
• Air inlet adjuster cheater valve
• 1/4 Universal Thread air inlet
Curved Handle
AIR CAP
NUMBER
AND TYPE
AIR CONSUMPTION
BAR (PSI)
RECOMMENDED
AIR
INLET
PRESSURE
TYPICAL
FLUID
SIZE mm*
TYPICAL
FAN
PATTERN*
PRESSURE GRAVITY SUCTION
No. 430
Conventional
339 l/min (12 scfm) 3.5 bar
(50 psi)
200-280 200 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm
1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm,
2.2*mm
1.4*mm, 1.6mm, 1.8*mm,
2.0mm, 2.2*mm
No. 443
Conventional
345 l/min (12.6 scfm) 3 bar
(45 psi)
200-300 300 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm
1.2mm, 1.3mm, 1.8*mm,
2.0mm, 2.2*mm
1.6mm, 1.8*mm, 2.0mm,
2.2mm
No. 462
Conventional
380 l/min (13.5 scfm) 3 bar
45 psi)
500-3000† 450† 2.2*mm†, 2.8*mm†
No. 470
Conventional
465 l/min (16.4 scfm) 3 bar
(45 psi)
500-1800† 420† 2.2*mm†, 2.8*mm† 2.8*mm
No. 477
Conventional
480 l/min (17 scfm) 3 bar
(45 psi)
200-800 430 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm
No. 497
Conventional
510 l/min (18 scfm) 3.5 bar
(50 psi)
200-600 380 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm
Compliant Spray Gun Range
Conventional Spray Gun Range
AIR CAP
NUMBER
AND TYPE
AIR CONSUMPTION
BAR (psi)
RECOMMENDED
AIR
INLET
PRESSURE
TYPICAL
FLUID
SIZE mm*
TYPICAL
FAN
PATTERN*
PRESSURE GRAVITY SUCTION
No. 500R (HVLP) 195 l/min (7 scfm) 1.0 bar (14 psi) 130-190 Round spray 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm
1.3mm, 1.6mm, 1.8*mm,
2.0mm, 2.2mm
1.6mm, 1.8*mm,
2.0mm, 2.2mm
No. 505 (HVLP) 385 l/min (13.6 scfm) 1.3 bar (19 psi) 130-190 270 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm
1.3mm, 1.6mm, 1.8*mm,
2.0mm, 2.2mm
1.6mm, 1.8*mm,
2.0mm, 2.2mm
No. 590HV (HVLP) 200 l/min (7.1 scfm) 1.0 bar (14 psi) 0-150 120 0.5mm, 0.7mm, 1.0mm
No. 510 Trans-Tech 283 l/min (10 scfm) 2 bar (29 psi) 160-220 270 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm
1.3mm, 1.6mm, 1.8*mm,
2.0mm, 2.2mm
1.6mm, 1.8*mm,
2.0mm, 2.2mm
No. 513 Trans-Tech 394 l/min (14.1 scfm) 2 bar (29 psi) 200-800 350 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm
1.3mm, 1.6mm, 1.8*mm,
2.0mm, 2.2mm
1.6mm, 1.8*mm,
2.0mm, 2.2mm
No. 515 Trans-Tech 364 l/min (12.9 scfm) 2 bar (29 psi) 200-400 320 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm, 2.8*mm
No. 520 Trans-Tech 284 l/min (10 scfm) 2 bar (29 psi) 150-250 280 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm,
No. 522 Trans-Tech 410 l/min (14.5 scfm) 2 bar (29 psi) 200-600 350 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm, 2.8*mm
No. 523 Trans-Tech 410 l/min (14.5 scfm) 2 bar (29 psi) 200-400 300 0.85mm, 1.0mm, 1.2mm, 1.3mm, 1.4*mm,
1.6mm, 1.8*mm, 2.0mm, 2.2*mm, 2.8*mm
No. 590 Trans-Tech 218 l/min (7.8 scfm) 2 bar (29 psi) 0-150 150 0.5mm, 0.7mm, 1.0mm
No. 591 Trans-Tech 218 l/min (7.8 scfm) 2 bar (29 psi) 0-150 150 0.5mm, 0.7mm, 1.0mm
No. 505 (HVLP) and No. 500R (HVLP) air caps operate at 0.7 bar (10 psi) at the cap.
All illustrated flow rates and fan sizes may vary according to paint/material viscosity and pressure used.
Advance HD Compliant Spray Guns utilize high-grade Stainless Steel fluid
tips and needles, matched with either Trans-Tech Compliant or HVLP air
caps manufactured from Plated Hard Brass for a long and durable working
life. Select your Advance HD Compliant Spray Gun preference and nozzle
combinations from the charts (below) to achieve optimal performance for
your spray process.
Advance HD Conventional Spray Guns utilize high-grade Stainless Steel fluid
tips and needles, matched with Conventional air caps manufactured from
Plated Hard Brass for a long and durable working life. Select your Advance
HD Conventional Spray Gun preference and nozzle combinations from the
charts (below) to achieve optimal performance for your spray process.
* Hardened & tungsten carbide tips and needles are available in these sizes.
† = ceramic material
Spray gun inlet thread sizes and type:
Air Connection 1/4 (m) Universal Thread size, accepts BSP and/or NPS connectors.
Fluid Connection 3/8 (m) Universal Thread size, accepts BSP and/or NPS connectors.
Part numbering and packaging
Advance HD spray gun kits are packaged as: Pressure gun only;
Suction gun with 1 liter cup; and Gravity Feed kits including
.568 ml standard gravity cup.
Example of Advance HD Spray Gun part numbering:
ADV-P430 means …
ADV = Advance Gun / P = Pressure / 430 = Conventional
Air Cap / 14 = 1.4mm Fluid Tip and Needle
Optional Accessories
Suction Cup
KR-556-1-B
Gravity Cup
GFC-501
Fluid Filter Kit
1. VSA-512 St/St Fluid Filter Kit
(includes 3 elements)
2. �Tungsten Carbide and
Hardened Tips/Needles
(abrasive materials)
3. Nylon Tipped Needle
1
3
2
Gravity Cup (Blue polyester)
GFC-511 - For difficult fluids.
Suction Feed Cups hold more material
and spray at any angle, ideal for
bigger jobs. Slightly harder to clean
than gravity cups.
Gravity Feed Cups are a convenient and portable way to provide a minimal amount
of material to the spray gun. Gravity feed cups help reduce wasted material and the
cups are designed to be easy to clean.
Binks is a leading global manufacturer of products and systems
for the supply, application and curing of sprayed and dispensed
materials. Binks serves a variety of industries, including automotive,
pharmaceuticals, food and beverage, and manufacturing. With
decades of experience, Binks continues to set the standard for
precision, reliability, and innovation in fluid technology solutions.
Experience the difference.
Americas 1.800.992.4657 marketing@binks.com
EMEA 44.0.120 257.1111 marketing-eu@binks.com
China 86.21.33730108 mkt_cn@binks.com
Japan Sales Office 81.45.785.6421 jp-rans-tokyosales@binks.com
Japan Binks/DeV 81.45.785.6421 jp-binks-devi@binks.com
India/SE Asia 44.0.120 257.1111 marketing-roa@binks.com
A powerful solution can start with a simple conversation
We want to help build the best solution to your application challenges. Learn more about what
we can offer by reaching out to the office nearest you.
For more information,
visit binks.com.
©2025 Binks.
Models and specifications subject to
change without notice. All rights reserved.
Form No. 03-516-01
