- DX200 1:1 Pump Literature 06.17 [ English ]
FLUID HANDLING
Air Operated 1:1 Ratio Diaphragm Pumps
The Binks DX200 is a high flow
rate, air operated, 1:1 ratio, double
diaphragm circulation or
transfer pump.
The pump features a unique
no crease diaphragm which gives
a significantly extended working life,
whilst reducing maintenance down
time.
The optional built-in fluid regulator
delivers a constant and virtually pulse
free fluid delivery.
This removes the expense and
complications of an additional fluid
regulator or surge chamber.
The DX200 range features bare
pumps and multiple outfits. DX200 is
self-priming and perfect for use with
all types of spray gun technologies
including, Conventional, Compliant
Trans-Tech©, HVLP, LVLP and low
pressure Electrostatic guns.
MARKETS AND
APPLICATIONS
• Wood-Stains, Lacquers & Varnishes
• Primers, Sealers & Catalysed Lacquers
• Solvent OR Waterborne Coatings
• Adhesives & Fillers
• Plus many others...
Rugged Construction & Universal Material Compatibility
Available in Aluminium and Stainless Steel to handle a wide variety of fluids
Non-Stall & Quiet Running
A non-stall air valve and integrated muffler provides smooth, quiet running
Extended Service Intervals & Zero Leakage
Bonded PTFE diaphragm is more flexible, removing the need for mechanical
seals or packings, extending service intervals
Consistent Fluid Delivery
Unique no-crease diaphragm design and built-in fluid regulator ensures a
consistent pressure output and significantly reduced pulsation
Pumps Shear-Sensitive Materials
Low internal velocities and gentle pumping action does not shear coatings
Fast & Easy Servicing
Pump body provides unobstructed access to air valve and diaphragms for
fast and easy maintenance without the need to dismount the pump
dx200 usa.indd 1 27/06/2017 10:35
Binks DX200
Air Operated 1:1 Ratio Diaphragm Pumps
06.17 - USA
Built-in fluid regulator
saves money compared
with competitive products.
For further technical information refer to the Binks DX200 Diaphragm Pump Service Bulletins.
Easy To Use
Outfits include clearly
identified air regulators which
can independently control the
pump, fluid delivery pressures
and spray gun.
Save Costs
The built in fluid regulator
can save money compared
to competitive products.
Low internal pump volumes
minimise fluid wastage during
flushes.
Mounting Options
Pump outfits include a
mounting option and are fitted
with a flexible suction wand
and suction strainer on the
vertical bottom inlet. A rigid
suction tube is used when pail
mounted. The unregulated
model has a vertical top outlet,
while the fluid regulated model
is a front horizontal outlet.
Easy To Service
The end cap and air valve cover fixings are unobstructed
and can be removed with a single tool, enabling pump
maintenance to be performed wherever it is located.
Stainless Steel model with
Surge Chamber (for
applications where fluid filter
will shear fluid).
Order DX200SP.
A fluid filter is available on
the aluminium model.
Binks DX Series 5-Year Warranty
Binks® warrants to the original end-use purchaser that the
Binks branded products DX shall not fail under normal
use and service due to a defect in material or workmanship
within five (5) years from the date of shipment from Binks.
Does not include normal wear and tear parts.
DX200 PUMP SPECIFICATION (BARE PUMP)
Ratio 1:1
Max Air Pressure 7.0 bar (100 psi)
Max Fluid Pressure 7.0 bar (100 psi)
Nominal Flow Volume / Cycle 0.20 Litres (0.05 US Gall)
Fluid Output @ 60 Cycles/Min 12 l/min (3.17 US Gall/min)
Max Recommended
Continuous Cycle Rate
25 Cycles /min
Max Recommended
Intermittent Cycle Rate
60 Cycles /min
Inlet Fluid Connection
DX200A*/DX200S*
3/
4
/ 1/
2
BSPP Female
Outlet Fluid Connection
DX200A*/DX200S*
3/
4
/ 1/
2
BSPP Female
Maximum Dry/Wet Lift (Head) 4.6m (15.1ft) / 7.5m (24.6ft)
Air Inlet G1/
4
(BSPP) Female
Fluid Regulator Pilot Ø4 mm Tube
Air Volume / cycle @ 6.9 Bar/100psi 2.83l (0.1 SCFM)
Air Flow @ 10 cycles /
min 6.9 Bar/100psi
28.3l (1 SCFM)
Air Flow @ 30 cycles /
min 6.9Bar/100psi
84.9l (3 SCFM)
Air Quality ISO 8573.1 Class 3.3.2 # Dirt 5 microns
Water -20°C @ 7Bar (940ppm)
Oil 0.1mg/m3
Non Lubricated
Noise Level 71.2 dBA Leq
Weight - Bare Pump DX200A*/
DX200S*
9.5Kg (20.94lbs) / 8.05Kg
(17.75lbs)
DX200 Ordering Information
DX200 A B – C DX200 A B C – D E
Bare Pump Outfit (No Gun and Hoses)
A PUMP BODY B FLUID REGULATOR
A = Aluminium N = No Regulator
S = Stainless Steel R = With Regulator
P = Surge Chamber DX200S Only
C OUTLET OPTION D MOUNTING TYPE
= No Regulator Leave blank W = Wall
1 = 1 Regulator DX200*N only T = Tripod
2 = 2 Regulators DX200R* only C = Cart
3 = 3 Regulators DX200R* only P = Pail
E OPTIONS
= No Option Leave blank
Pail Mount only
A = Agitator
dx200 usa.indd 2 27/06/2017 10:35
