- Binks Ram Units 12-509-01 [ English ]
Ram Units
Tough, hard-working,
high-performance single
and dual post Rams
Ram Unit Pump
Outfit Options
Equip your Ram Unit from our
extensive range of durable,
hard-working MX Pumps.*
Binks’ new range of Ram Units offer a rugged,
reliable and high-performance solution for the
delivery of medium and high viscosity materials
in both standalone and system applications.
These durable units are built to last and will give long, trouble-
free performance offering continuous production while
keeping overall cost of ownership down.
Binks Ram Units provide the ideal delivery solution for
materials such as lubricants, mastics, adhesives, epoxies and
sealants. They deliver a constant, low pulse flow of material to
the dispensing tool by ensuring correct priming of the pump
and preventing material cavitation.
The range of single and dual post units are designed to
accommodate industry standard material containers from
20L to 205L. The twin seal follower plates accurately fit the
container, cleaning the inside as it descends and keeping
waste to a minimum.
Our Ram Units incorporate the highly regarded Binks MX range
of high pressure piston pumps. These solidly built pumps have
a reputation for durability, reliability and long life and are
available with a choice of ball-check or chop-check fluid inlets.
Complete Ram Units include an easy-use pneumatic control
box with ‘up/down’ switch, auto shut off when the container
is empty and a release valve to ‘break’ the suction seal when
lifting the ram plate clear of the used material. Optional extras
include an automatic ‘change-over’ switch for use with two
Ram Units on duty/standby mode.
Features:
• Wide choice of pumps, follower plates and pneumatic rams,
optimize Ram Unit applications.
• Units to suit industry standard 20, 30, 60 and 205 Liter containers.
• Dual-seal follower plates as standard reduce material wastage.
• Choice of pneumatic rams on 205L model: Ø80mm (DR205) for
high-pressure duty and Ø160mm (DRX205) for extreme duty.
• Incorporate Binks highly respected MX high pressure pumps
giving trouble-free operation and long working life.
• Stainless steel pump fluid section as standard with choice of
ball-check or chop-check inlet.
• Wide choice of pump ratios from 15:1 to 60:1 (ball-check) and
5:1 to 68:1 (chop-check).
• Patented Binks low-ice air motors give reliable, non-stop
performance.
• 5-Year warranty on manufacturing defects.
Our Ram Units are built on three rugged chassis sizes
The 500mm x 350mm single-post chassis for the SR20, the
710mm x 460mm dual-post chassis for the DR20, 30 and 60 units
and the 915mm x 60mm chassis for the DR205 and DRX205 units.
SR20
Single-Post Ram Unit with Ø80mm pneumatic rams
and 20L / 5 US Gallon Follower Plate. 6 pump options.
Trolley-mounted version available
DR60 Dual-Post Ram Unit with Ø80mm pneumatic rams
and 20L / 5 US gallon follower plate. 13 pump options.
DR60 Dual-Post Ram Unit with Ø80mm pneumatic rams and
30L / 7.5 US gallon follower plate. 13 pump options.
DR60 Dual-Post Ram Unit with Ø80mm pneumatic rams
and 60L / 15 US gallon follower plate. 13 pump options.
DR205 Dual-Post Ram Unit with Ø80mm pneumatic rams and
205L / 55 US gallon follower plate. 23 pump options.
DRX205
Dual-Post Extreme Duty Ram Unit with Ø160mm
pneumatic rams and 205L / 55 US gallon follower
plate. 23 pump options.
RAM TYPE
Single-post (SR), Dual-post (DR)
and Extreme duty (DRX)
DRUM VOLUME (Liter)
20, 30, 60, 205
FOLLOWER PLATE SEAL MATERIAL
EDPM (E) or Polyurethane (P)
PUMP FLUID OUTPUT/CYCLE (cc/cycle)
68, 115, 122, 190, 200, 220, 420, 440, 860, 880
RAM SECTION PUMP SECTION
DR 30 E -MX 115 68 PU - S M X
INLET VALVE TYPE
Ball-Check (B) or Chop-Check (X)
PACKING ADJUSTMENT
Manual (M) only
PUMP ROD MATERIAL
Nitrided Carbon Steel (C) or Ceramic Coated
Stainless (S) Steel
PUMP PACKING MATERIAL
PTFE & UHMWPE (PU)
PUMP RATIO
Ball-Check Pumps: 15:1, 18:1, 22:1, 23:1, 30:1, 35:1, 41:1, 46:1, 60:1
Chop-Check Pumps: 5:1, 12:1, 18:1, 23:1, 24:1, 30:1, 33:1, 39:1,
43:1, 46:1, 66:1, 68:1
Optional extras include:
Auto changeover unit for twin Ram Unit
‘duty/standby’ control (Part No. 104099)
Trolley for SR20
(Part No. 104128)
* See back page for pump fluid output and pressure ratings.
F
LUID SECTIO
N
S
F
O
R
A
L
O
N
GER WORK
IN
G
L
IF
E
Patented anti-stall, magnetic
detent technology with quick
exhaust valves give ‘no-ice’
operation for uninterrupted
production.
Follower plates include
priming port and release
valve for fast container
change-over.
Dual-seal follower plates for
industry standard 20, 30, 60
& 205 liter containers.
Choice of ball-check (left)
or chop-check (right) inlet
valve configuration.
Stainless steel fluid sections
as standard.
Pump air control.
Nitrided carbon steel pump
rod (top) Ceramic-coated
stainless steel (bottom)
for greater durability
(see below).
Easy-to-use Ram control box
for simple operation.
Independent trials have
verified that Ceramic-Coated
stainless steel pump pistons
provide the most durable
surface available for resisting
wear from highly abrasive
fluids, while reducing friction
and extending the pump
packing lifecycle.
500
375
250
125
MX22060 (2,3)
MX22035 (2,3)
MX22022 (2,3)
MX12241
(1,2,3)
MX19041
(2,3)
122 190 440 880220 Fluid Section Output
(CC / Cycle)
MX44046 (3)
MX44030 (3)
MX44018 (3)
MX88023 (3)
MX88015 (3)
68 115 420 860200 Fluid Section Output
(CC / Cycle)
500
375
250
125
MX20066 (2,3)
MX22039 (2,3)
MX22024 (2,3)
MX42046 (3)
MX42030 (3)
MX42018 (3)
MX86023 (3)
MX86015 (3)
MX11568 (1,2,3)
MX11543 (1,2,3)
MX6822 (1,2,3)
MX6812 (1,2,3)
MX6805 (1,2,3)
Pu
m
p
Fl
ui
d
Pr
es
su
re
(@
7
B
ar
10
1 p
si
)
Pu
m
p
Fl
ui
d
Pr
es
su
re
(@
7
B
ar
10
1 p
si
)
KEY:
1 = Available on SR20
2 = Available on DR20, DR30, DR60
3 = Available on DR205 & DRX205
KEY:
1 = Available on SR20
2 = Available on DR20, DR30, DR60
3 = Available on DR205 & DRX205
A powerful solution can start with a simple conversation
We want to help build the best solution to your application challenges. Learn more about what
we can offer by reaching out to the office nearest you.
For more information,
visit binks.com. ©2025 Binks.
Models and specifications subject to
change without notice. All rights reserved.
AMPM-25BINKS128 | Form No. 12-509-01
Americas 1.800.992.4657 marketing@binks.com
EMEA 44.0.120 257.1111 marketing-eu@binks.com
China 86.21.33730108 mkt_cn@binks.com
Japan Sales Office 81.45.785.6421 jp-rans-tokyosales@binks.com
Japan Binks/DeV 81.45.785.6421 jp-binks-devi@binks.com
India/SE Asia 44.0.120 257.1111 marketing-roa@binks.com
Binks Ram Unit
5-Year Warranty
Binks warrants to the original end-use
purchaser that Binks Ram Unit products shall
not fail under normal use and service due to
a defect in material or workmanship within
five (5) years from the date of shipment from
Binks. Does not include normal wear and tear.
For further technical information, refer to
the Binks Ram Unit Service Bulletins. Further
customized versions are available, contact
your Binks representative to discuss your
requirements.
F
IV
E
Y
E
A
R
L
IM
IT
ED PRODUC
T
W
A
R
R
A
N
T
Y55
BINKS Ram Units/Compatible pump specifications
Ram Unit Specifications
FEATURE
Maximum Working Air Pressure 6 Bar / 87 psi
Air Inlet 1/2 BSP F
Ram Stroke
SR20 410 mm / 16
DR20/30/60 688 mm / 27
DR205
960 mm / 37.8
DRX205
Unit Height -
Fully Extended
SR20 1242 mm / 49
DR20/30/60 1750 mm / 69
DR205
2550 mm / 100
DRX205
Wiper Ring
Material
SR20
EPDM / PU
DR20/30/60
DR205
EDPM
DRX205
Weight
Without Pump
SR20 55 kg / 121 lbs
DR20/30/60 130 kg / 286 lbs
DR205
212 kg / 466 lbs
DRX205
Ram Unit Ball-Check Pump Options
Ram Unit Chop-Check Pump Options
