- 압력 릴리프 밸브 PRV16 & PRV22 매뉴얼 77-3257 EN [영어 ] [ 영어 ]
77-3257
PRV16-X-XX & PRV22-X-XX
Pressure Relief Valve
PRV16-X-XX - 16 Bar
PRV22-X-XX - 22 Bar
EN
It is the Customer's responsibility to have all operators and service personnel read and
understand this manual.
Contact your local Binks representative for additional copies of this manual.
READ ALL INSTRUCTIONS BEFORE OPERATING THIS PRODUCT
ADDITIONAL RESOURCES
For additional information or copies of your service manual, please visit us online at:
binks.com/en/library
Or use this QR code with your mobile device:
XXXXXXXX
Insert
QR
code
Obey local or municipal regulations for product recycling and disposal.
IMPORTANT! DO NOT DESTROY
77-3257 R6 (06/2025) 2/16 www.binks.com
EN
Providing all conditions of safe use / installation stated within the product manuals have been complied with and also installed in accordance
with any applicable local codes of practice.
Executive President: Engineering and
Operations, Shoreview, MN, 55126. USA
F. A. Sutter
14-04-25.
Product Description / Object of Declaration:
This Product is designed for use with: Solvent & Waterbased Materials
BPR - 107757-X-X, 107758-X-X, 107748, 107749, 107750,
107754-X-X, 107755-X-X, PRV22-X-X, 107906, 107908, 107760-
X-X, 107928, PRV16-X-X.
Suitable for use in hazardous area: Zone 1/Zone 2
Protection Level: II 2 G c X IIB T4, Ex h IIB T4 Gb X
Element Materials Technology Rotterdam B.V. (2812)
EU Declaration of Conformity
This Declaration of Conformity / Incorporation is issued under the sole responsibility of the
manufacturer:
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
by complying with the following statutory documents and harmonised standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
EN 12621:2006+2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN ISO 80079-36:2016 Explosive Atmospheres- Part 36:Non Electrical equipment for explosive atmospheres-Basic methods
and requirements.
EN ISO 80079-37:2016 Explosive Atmospheres- Part 37: Non Electrical equipment for explosive atmospheres - protection by
methods c, b and k.
EN 1127-1:2019 Explosive atmospheres - Explosion prevention - Basic concepts
Notified body details and role:
Lodging of ATEX Technical file
This Declaration of Conformity / Incorporation is issued
under the sole responsibility of the manufacturer:
Binks U.K. Limited,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Representative authorised to compile the technical file President @. Binks France SAS
5 Place Pierre Semard, 94130 Nogent sur Marne , Paris, France
Signed for and on behalf of Binks
U.K. Ltd:
Document Part No.
77-3257 R6 (06/2025) 3/16 www.binks.com
EN
This Declaration of Conformity / Incorporation is issued under the sole responsibility of the
manufacturer:
Supply of Machinery (Safety) Regulations 2008
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016
by complying with the following statutory documents and designated standards:
BS EN ISO 12100:2010 Safety of Machinery - General Principles for Design
BS EN ISO 80079-36:2016 Explosive Atmospheres- Part 36:Non Electrical equipment for explosive atmospheres-Basic methods
and requirements.
BS EN ISO 80079-37:2016 Explosive Atmospheres- Part 37: Non Electrical equipment for explosive atmospheres - protection
by methods c, b and k.
BS EN 1127-1:2019 Explosive atmospheres - Explosion prevention - Basic concepts
Providing all conditions of safe use / installation stated within the product manuals have been complied with and also installed in accordance
with any applicable local codes of practice.
Signed for and on behalf of Binks
U.K. Ltd:
Executive President: Engineering and
Operations, Shoreview, MN, 55126. USA
F. A. Sutter
Document Part No.
0 22-04-25
Zone 1/Zone 2
Protection Level: II 2 G c X IIB T4, Ex h IIB T4 Gb X
Approved body details and role: Element Materials Technology Warwick Ltd. UK. (0891)
Lodging of UKEX Technical file
This Declaration of Conformity / Incorporation is issued
under the sole responsibility of the manufacturer:
Binks U.K. Limited,
Ringwood Road,
Bournemouth, BH11 9LH. UK
UKCA Declaration of Conformity
This Product is designed for use with: Solvent & Waterbased Materials
Suitable for use in hazardous area:
Product Description / Object of Declaration: BPR - 107757-X-X, 107758-X-X, 107748, 107749, 107750,
107754-X-X, 107755-X-X, PRV22-X-X, 107906, 107908, 107760-
X-X, 107928, PRV16-X-X.
77-3257 R6 (06/2025) 4/16 www.binks.com
ENIn this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as
follows:
WARNING CAUTION NOTE
Hazards or unsafe practices which could result in
severe personal injury, death or substantial property
damage.
Hazards or unsafe practices which could result in
minor personal injury, product or property
damage
Important installation, operation or maintenance
information.
WARNING
Read the following warnings before using this equipment.
READ THE MANUAL. Before operating finishing equipment, read and
understand all safety, operation and maintenance information
provided in the operation manual.
AUTOMATIC EQUIPMENT. Automatic
equipment may start suddenly without
warning.
WEAR SAFETY GLASSES. Failure to wear safety glasses with side
shields could result in serious eye injury or blindness.
PROJECTILE HAZARD. You may be
injured by venting liquids or gases that
are released under pressure, or flying
debris.
DE-ENERGIZE, DE-PRESSURISE, DISCONNECT AND LOCK OUT ALL
POWER SOURCES DURING MAINTENANCE. Failure to de-energize,
disconnect and lock out all power supplies before performing
equipment maintenance could cause serious injury or death. KNOW WHERE AND HOW TO SHUT
OFF THE EQUIPMENT IN CASE OF AN
EMERGENCY.
NOISE LEVELS. The A-weighted sound level of pumping and spray
equipment may exceed 85 dB(A) depending on equipment settings.
Actual noise levels are available on request. It is recommended that
ear protection is worn at all times while equipment is in use.
PRESSURE RELIEF PROCEDURE.
Always follow the pressure relief
procedure in the equipment instruction
manual.
INSPECT THE EQUIPMENT DAILY. Inspect the equipment for worn or
broken parts on a daily basis. Do not operate the equipment if you
are uncertain about its condition.
OPERATOR TRAINING. All personnel
must be trained before operating
finishing equipment.
EQUIPMENT MISUSE HAZARD. Equipment misuse can cause the
equipment to rupture, malfunction or start unexpectedly and result in
serious injury. PACEMAKER WARNING. You are in the
presence of magnetic fields which may
interfere with the operation of certain
pacemakers.HIGH PRESSURE CONSIDERATION. High pressure can cause serious
injury. Relieve all pressure before servicing. Spray from the gun,
hose leaks or ruptured components can inject fluid into your body
and cause extremely serious injury.
KEEP EQUIPMENT GUARDS IN PLACE.
Do not operate the equipment if the
safety devices have been removed.
STATIC CHARGE. Fluid may develop a static charge that must be
dissipated through proper grounding of the equipment, objects to be
sprayed and alll other electrically conductive objects in the dispensing
area. Improper grounding or sparks can cause a hazardous condition
and result in fire, explosion or electric shock and other serious injury.
NEVER MODIFY THE EQUIPMENT. Do
not modify the equipment unless the
manufacturer provides written
approval.
PROP 65 WARNING. WARNING: This product contains chemicals
known to the state of California to cause cancer and birth defects or
other reproductive harm.
PINCH POINT HAZARD. Moving parts
can crush and cut. Pinch points are
any areas where ther are moving
parts.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE
OPERATOR OF THE EQUIPMENT.
77-3257 R6 (06/2025) 5/16 www.binks.com
EN
The Binks mechanical Pressure Relief Valve offers a practical solution for the prevention of Smart Pump and paint
system overpressure. The mechanical relief valve can be easily installed directly on the pump outlet manifold.
Any relieved paint pressure is piped back into the mix tank.
General Description
An electrical detection system is usually installed (pressure switch or pressure sensor) to detect and stop the
pump when a potentially damaging high paint pressure is reached. This could be due to an inadvertent closing
of an outlet ball valve, paint filter blockage or paint line restriction.
The Pressure relief valve is a purely mechanical device and intended to complement the primary electrical safety
device which must be installed.
¾ NPS/BSP, 1 Sanitary or ¾
NPT(Female) Relief Port options
Stem – Seat design eliminate valve ‘Chatter’
Minimum branch volume eliminates ‘dead
zone’
77-3257 R6 (06/2025) 6/16 www.binks.com
EN
The Pressure relief valve should be directly mounted on the outlet of the pump using suitable sanitary gaskets
and clamps.
The relief port should be connected to the mix tank with suitable clear hose, length as short as possible (No more
3m long). Clear hose is recommended as this will indicate the valve has operated
As the mechanical pressure relief is intended to be used only as the secondary pressure relief device, the primary
device, the electrical sensor should be set to operate at a lower pressure.
Smart Pump Minimum Hose Diameter
E2-15, E2-30
E2-40, E4-60
Installation
13mm Nominal Bore
16mm Nominal Bore
Should the mechanical valve operate then the cause of problem should first be investigated. Following
satisfactory conclusion the relief valve and hose should be removed and cleaned. If no spare valve is available
then a blanking plate can be temporarily put in place whilst cleaning takes place.
77-3257 R6 (06/2025) 7/16 www.binks.com
EN
PRV22-24 bar
[348 psi]
Stainless
Steel, PTFE,
Fluorocarbon
rubber
¾ BSPP / NPS
¾ BSPP / NPSPRV22-U-15
PRV22-U-20
PRV22-S-10
PRV22-S-15
PRV22-S-20
PRV22-N-10
PRV22-N-15
PRV22-N-20
1½
2
1
1½
2
PRV16-U-10
PRV16-U-15
1
1½
2
2
PRV22-U-10 1
PRV16-S-20
Cracking
Pressure
PRV22-22 bar
[319 psi]
PRV16-18 bar
[261 psi]
1½
PRV16-U-20 2
PRV16-16 bar
[232 psi]
PRV16-N-10 1
PRV16-N-15 1½
PRV16-N-20 2
Relief Port ConnectionPart No.
Inlet / Outlet
Sanitary
Connection
Wetted
Parts
1
PRV16-S-10 1
PRV16-S-15 1½
Full Flow
Pressure
Mechanical Pressure Relief Valve
1 Sanitary
¾ NPT (Female)
1 Sanitary
¾ NPT (Female)
Relief Port Connections
Part number
193202
193614
193736
Description
¾ BSPP / NPS
1 Sanitary
¾ NPT (Female)
77-3257 R6 (06/2025) 8/16 www.binks.com
EN
Important note
Main valve assembly
Exploded view of main valve assembly
Shaft
The pressure relief valve is not a servicable product, if components are damaged the VALVE must be replaced.
If valve shaft or seat is worn please check functionality of high pressure limit switch. Wear on these components
signifies the pressure switch is not functioning correctly.
Valve seat
77-3257 R6 (06/2025) 9/16 www.binks.com
EN
2 (All Models)
3 192009 1½ Sanitary Clamp 1 (All Models)
193204 1 Special sanitary tee 1 PRVXX-X-10
193201 1½ Special sanitary tee
193200 2 Special sanitary tee 1 PRVXX-X-20
5
G¾ [¾BSPP] / ¾ NPS male outlet 1
PRVXX-U-XX
with female 60° cone
Note: 1 off Clamp and Gasket are included for assembly to the Pump Outlet Manifold
1 PRVXX-X-154
193736 ¾ NPT female outlet 1 PRVXX-N-XX
193614 1 sanitary outlet 1
Valve Assembly - Parts List
Item Part No.
PRV16-X-XX
PRV22-X-XX
1
192008 1½ Sanitary Gasket 1
Quantity RemarksDescription
PRV16 Main valve assembly 1
PRV22 Main valve assembly 1
PRVXX-S-XX
193202
77-3257 R6 (06/2025) 10/16 www.binks.com
EN
Model Shown PRV22-U-15
* - 1 off Clamp and Gasket are included for assembly to the Pump Outlet Manifold
Valve Assembly
*
77-3257 R6 (06/2025) 11/16 www.binks.com
EN
NOTES
77-3257 R6 (06/2025) 12/16 www.binks.com
EN
NOTES
77-3257 R6 (06/2025) 13/16 www.binks.com
EN
NOTES
77-3257 R6 (06/2025) 14/16 www.binks.com
EN
Australia Tel: +61 (0) 2 8525 7555
WARRANTY PAGE
For technical assistance or to locate an authorised distributor, contact one of our
international sales and customer support locations below.
REGION BINKS CONTACT
Americas Tel: 1-888-992-4657
Europe, Africa, Middle East Tel: +44 (0)1202 571 111
India marketingroa@binks.com
China Tel: +8621-3373 0108
Korea Tel: +82313663303
Japan Tel: +81 45 785 6421
The use of any parts or accessories, from a source other than Binks, will void all
warranties. Failure to reasonably follow any maintenance guidance provided, may
invalidate any warranty.
For specific warranty information please contact Binks.
WARRANTY POLICY
This product is covered by Binks materials and workmanship limited warranty.
77-3257 R6 (06/2025) 15/16 www.binks.com
EN
Binks is a global leader in innovative finishing technologies. Binks reserves the right to modify
equipment specifications without prior notice.
Binks®, DeVilbiss®, and Ransburg® are registered trademarks of Binks US, LLC.
© 2025 Binks US, LLC. All rights reserved.
77-3257 R6 (06/2025) 16/16 www.binks.com
