- PVC 건용 E415 매뉴얼 9836 4172 01 [ 영어 ] [ 영어 ]
EN
www.Binks.com
Binks E415 for PVC
GENERAL SERVICE INSTRUCTION
Service Instruction
EN
www.Binks.com 9836 4172 01-R2 (07/2025)
The following instruction is reflecting normal running conditions with PVC
material.
Intermediate service kit 6004036720 content
Qty. Description Partnumber
1 Gasket 6004 0147 57
9 Needle packing 0663 9051 11
3 Guide 6004 0147 47
2 Sealing ring 6004 0360 22
4 Seal air 6004 0151 52
4 O-ring 6004 0146 55
1 Packing, cylinder 6004 0149 56
3 O-ring 0663 6130 00
3 Guide ring 6004 0147 51
3 Nozzle packing 6004 0147 55
3 Packing 4,2 x 9,8 x 0,8 6004 0360 90
3 Packing 6,1 x 10,4 x 0,8 6004 0360 91
Your specific applicator may not use all listed parts. For
more information refer to the specific spare parts list for
your applicator.
2 / 10
1. Changed at every service / 12 months running
All parts changed at every service are included in
intermediate service kit 6004036720
• All parts marked yellow
2. Regular interval service items / 24 months running
• All parts marked blue
3. All parts that are reused needs to be thoroughly cleaned and visually
inspected for damage and excessive wear.
• All parts, unmarked or blue
Note:
• The frequency for preventive maintenance has to be evaluated for each case of
application. The material abrasiveness, application parameters (flow/pressure), number
of shifts, and quality of robot installation (hose guiding etc.) are factors that affect the
service interval.
• A proper maintenance area with cleaning equipment is required.
• Your specific applicator may not include all shown parts or have different part numbers.
ALWAYS refer to the specific spare parts listing supplied with every unit.
• Follow instructions in the operators manual.
• Use correct tools. Tool kit part number 6004 0154 05.
EN
www.Binks.com 9836 4172 01-R2 (07/2025) 3 / 10
Central body assembly
1
3
2
5 6
4
Pos. Qty. Description Partnumber Note
1 1 Central body (with sleeve) 6004 0360 00 -
2 2 Packing set material inlet 6004 0146 80 Page 3
3 1 Packing set material return 6004 0146 81 Page 3
4 1 Gasket 6004 0147 57 -
5 2 Locating pins 0102 0179 00 Included in 6004 0360 00
6 1 Valve needle guide 6004 0148 64 -
EN
www.Binks.com 9836 4172 01-R2 (07/2025) 4 / 10
Packing set material inlet
Pos. Qty. Description Partnumber
1 3 Needle packing 0663 9051 11
2 1 Guide 6004 0147 47
3 1 Packing spacer inlet 6004 0146 50
Pos. Qty. Description Partnumber
1 3 Needle packing 0663 9051 11
2 1 Guide 6004 0147 47
3 1 Packing spacer return 6004 0146 51
Packing set material return
1
3
2
1
1
1
3
2
EN
www.Binks.com 9836 4172 01-R2 (07/2025) 5 / 10
Pos. Qty. Description Partnumber
1 2 Flange bearing 6004 0147 28
2 4 Screw M5 x 16 0215 0512 00
3 1 Seal ring HR 6004 0360 19
4 1 Bearing housing 6004 0360 05
5 1 Distributor assembly, air ring 6004 0360 20
6 1 Distributor ring, leakage 6004 0147 13
7 2 Sealing ring PVC 6004 0360 22
8 2 Distributor ring, material 6004 0147 12
9 1 Separator ring PVC 6004 0147 59
10 1 Support disk 6004 0147 22
11 1 Swivel housing 6004 0360 06
For easy disassembly of the swivel chamber use special
tool 6004015414, included in tool kit 6004015405
22 20 21
10
17
12
16
19
18
15
1
13
14
11
5
4
1
2
6 7 7 8 9 8
3
Pos. Qty. Description Partnumber
12 1 Packing 6004 0360 08
13 1 Solenoid valve manifold 6004 0360 07
14 2 Screw M3 x 16 0216 1109 00
15 6 Screw M3 x 6 Z 0162 1567 00
16 1 Protection cover 6004 0360 09
17 3 Solenoid valve 3/2 6004 0360 12
18 1 Cover 6004 0360 10
19 1 Coupling 6003 9827 41
20 4 Seal air 6004 0151 52
21 1 Air distributor ring 6004 0360 04
22 4 O-ring 6004 0146 55
Swivel chamber
EN
www.Binks.com 9836 4172 01-R2 (07/2025) 6 / 10
Connection housing
6
15
14
13
6
7
8
9
10
11
12
3
4
1
18
5
2
1
17
Pos. Qty. Description Partnumber
1 4 O-ring 10 x 2,2 0663 9051 16
2 3 Connection cable, Solenoid valve 6004 0360 13
3 1 Left side cover 6004 0149 24
4 8 Screw M3 x 6 Z 0162 1567 00
5 1 Connection piece, lower 6004 0360 14
6 4 Screw M5 x 20 0211 1208 03
7 1 Connection piece, upper 6004 0149 07
8 4 Screw M5 x 30 0211 1211 03
9 2 Gasket 3/8 0661 1026 00
16
Pos. Qty. Description Partnumber
10 2 Nipple 3/8 6803 1250 00
11 1 Upper cover 6004 0149 26
12 1 Right side cover 6004 0149 27
13 1 Connection flange 6004 0149 15
14 1 Female connector 18 pin CPL 6004 0150 35
15 1 PT 100 sensor (high pressure) 6004 0147 33
16 1 Gasket 1/8 0661 1014 00
17 1 Pressure transducer (with amplifier) 6004 0146 34
18 1 Connector T3 6004 0361 06
EN
www.Binks.com 9836 4172 01-R2 (07/2025) 7 / 10
Nozzle head
2
6
Pos. Qty. Description Partnumber
1 1 Nozzle head 6004 0155 22
2 1 Screw M6 x 12 0515 0612 00
3 1 Nozzle cap 6004 0155 21
4 3 Nozzle packing 6004 0147 55
5 3 Screw M4 x 20 0211 1147 00
6 3 Nozzle -
3
4
1
5
EN
www.Binks.com 9836 4172 01-R2 (07/2025) 8 / 10
Cylinder assembly
Pos. Qty. Description Partnumber Note
1 1 Packing, cylinder 6004 0149 56
2 1 Cylinder housing 6004 0360 18
3 3 Screw M4 x 25 0162 1568 20
4 3 Spring 6004 0147 44
5 1 Cylinder cover 6004 0360 21
6 3 Screw M4 x 20 0211 1147 00
7 - Needle packing 0663 9051 11 Page 3
1
2
3
4
5
6
7
EN
www.Binks.com 9836 4172 01-R2 (07/2025) 9 / 10
Material valve needle
Lock ring
Pos. Qty. Description Partnumber
1 1 Threaded needle 6004 0148 19
2 1 Piston 6004 0147 16
3 1 O-ring 0663 6130 00
4 2 Set screw M4 x 5 0196 1167 46
5 1 Guide ring 6004 0147 51
3
1
4
2
5
4
Pos. Qty. Description Partnumber
1 1 Lock ring 6004 0145 31
2 2 Screw M5 x 12 0211 1205 01
3 1 Locating pin 2 x 6 0102 0951 26
4 1 Washer 6004 0143 37
1
3
2
EN
www.Binks.com 9836 4172 01-R2 (07/2025) 10 / 10
